Monitoring (medicine) | EPFL Graph Search

In medicine, monitoring is the observation of a disease, condition or one or several medical parameters over time. It can be performed by continuously measuring certain parameters by using a medical monitor (for example, by continuously measuring vital signs by a bedside monitor), and/or by repeatedly performing medical tests (such as blood glucose monitoring with a glucose meter in people with diabetes mellitus). Transmitting data from a monitor to a distant monitoring station is known as telemetry or biotelemetry. Classification by target parameter Monitoring can be classified by the target of interest, including:

Cardiac monitoring, which generally refers to continuous electrocardiography with assessment of the patients condition relative to their cardiac rhythm. A small monitor worn by an ambulatory patient for this purpose is known as a Holter monitor. Cardiac monitoring can also involve cardiac output monitoring via an invasive Swan-Ganz catheter.
Hemodynamic m

Effects of illuminance intensity on the green channel of remote photoplethysmography (rPPG) signals

Ata Jedari Golparvar

Point-of-care remote photoplethysmography (rPPG) devices that utilize low-cost RGB cameras have drawn considerable attention due to their convenience in contactless and non-invasive vital signs monitoring. In rPPG, sufficient lighting conditions are essential for obtaining accurate diagnostics by observing the complete signal morphology. The effects of illuminance intensity and light source settings play a significant role in rPPG assessment quality, and it was previously observed that different lighting schemes result in different signal quality and morphology. This study presents a quantitative empirical analysis where the quality and morphology of rPPG signals were assessed under different light settings. Participants' faces were exposed to the white LED spotlight, first when the sources were installed directly behind the video camera, and then when the sources were installed in a cross-polarized scheme. Hence, the effect of specular reflectance on rPPG signals could be observed in an increasing projection. The signal qualities were analyzed in each intensity level using a signal-to-noise (SNR) ratio metric. In 3 of 7 participants, placing the video camera on the same level as the light source led to signal quality loss of up to 3 dB for the range 30-60 Lux. In addition, two fundamental morphological features were analyzed, and the derivative-related feature was found to be increasing with illuminance intensity in 6 of 7 participants.

SPRINGER2022

M2D2: Maximum-Mean-Discrepancy Decoder for Temporal Localization of Epileptic Brain Activities

Amir Aminifar, Alireza Amirshahi, David Atienza Alonso, Anthony Hitchcock Thomas

Recent years have seen growing interest in leveraging deep learning models for monitoring epilepsy patients based on electroencephalographic (EEG) signals. However, these approaches often exhibit poor generalization when applied outside of the setting in which training data was collected. Furthermore, manual labeling of EEG signals is a time-consuming process requiring expert analysis, making fine-tuning patient-specific models to new settings a costly proposition. In this work, we propose the Maximum-Mean-Discrepancy Decoder (M2D2) for automatic temporal localization and labeling of seizures in long EEG recordings to assist medical experts. We show that M2D2 achieves 76.0% and 70.4% of F1-score for temporal localization when evaluated on EEG data gathered in a different clinical setting than the training data. The results demonstrate that M2D2 yields substantially higher generalization performance than other state-of-the-art deep learning-based approaches.

2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Baris Çaglar, Véronique Michaud, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

Capillarity plays a crucial role in many natural and engineered systems, ranging from nutrient delivery in plants to functional textiles for wear comfort or thermal heat pipes for heat dissipation. Unlike nano- or microfluidic systems with well-defined pore network geometries and well-understood capillary flow, fiber textiles or preforms used in composite structures exhibit highly anisotropic pore networks that span from micron scale pores between fibers to millimeter scale pores between fiber yarns that are woven or stitched into a textile preform. Owing to the nature of the composite manufacturing processes, capillary action taking place in the complex network is usually coupled with hydrodynamics as well as the (chemo) rheology of the polymer matrices; these phenomena are known to play a crucial role in producing high quality composites. Despite its importance, the role of capillary effects in composite processing largely remained overlooked. Their magnitude is indeed rather low as compared to hydrodynamic effects, and it is difficult to characterize them due to a lack of adequate monitoring techniques to capture the time and spatial scale on which the capillary effects take place. There is a renewed interest in this topic, due to a combination of increasing demand for high performance composites and recent advances in experimental techniques as well as numerical modeling methods. The present review covers the developments in the identification, measurement and exploitation of capillary effects in composite manufacturing. A special focus is placed on Liquid Composite Molding processes, where a dry stack is impregnated with a low viscosity thermoset resin mainly via in-plane flow, thus exacerbating the capillary effects within the anisotropic pore network of the reinforcements. Experimental techniques to investigate the capillary effects and their evolution from post-mortem analyses to in-situ/rapid techniques compatible with both translucent and non-translucent reinforcements are reviewed. Approaches to control and enhance the capillary effects for improving composite quality are then introduced. This is complemented by a survey of numerical techniques to incorporate capillary effects in process simulation, material characterization and by the remaining challenges in the study of capillary effects in composite manufacturing.

FRONTIERS MEDIA SA2022

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

Baris Çaglar, Véronique Michaud, Jacobus Gerardus Rudolph Staal, Helena Luisa Teixido Pedarros

FRONTIERS MEDIA SA2022