Concept
Chapiteau (architecture)
Publications associées (15)
RE:SLAB — a load bearing system for open-ended component reuse in building structures
Corentin Jean Dominique Fivet, Jan Friedrich Georg Brütting, Dario Redaelli, Alex-Manuel Muresan, Edisson Xavier Estrella Arcos
The construction industry plays a major role in the high levels of greenhouse gas emissions, resource consumption, and waste generation observed nowadays. Key to the circular economy, structural component reuse arises as a promising solution to divert cons ...
2024Exergy and exergoeconomic analyses of sustainable furfural production via reactive distillation
Lignocellulosic biomass is a potential renewable resource for production of high-value, sustainable products. Furfural is among the important bio-based chemicals in biorefineries. However, the conventional process of furfural production using a reaction-se ...
2021Influence of embedded steel column base strength on earthquake-induced residual deformations
Dimitrios Lignos, Hiroyuki Inamasu
Recent experiments on steel columns under multi-axis cyclic loading suggest that a steel column may experience appreciable axial shortening due to local buckling. Reconnaissance reports from recent earthquakes indicate that a number of embedded column base ...
2018Effect of Column Base Flexibility on the Hysteretic Response of Wide Flange Steel Columns
Dimitrios Lignos, Hiroyuki Inamasu
Recent experiments on wide flange steel columns subjected to multi-axial cyclic loading underscore the influence of the member end boundary conditions on strength and stiffness deterioration due to coupling of local and lateral torsional buckling. Field ob ...
2017Near-Memory Data Services
This column introduces seven invited position papers about the challenges and opportunities in near-data processing. "Near-Memory Data Services" by Babak Falsafi, "Automata Processing: The Memory Is the Processor!" by Mircea Stan, Kevin Skadron, "Overcomin ...
Institute of Electrical and Electronics Engineers2016Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement
Aurelio Muttoni, Miguel Fernández Ruiz, Juan Sagaseta Albajar, Luca Tassinari
Most analytical approaches and available test data for punching shear in flat slabs assume axis-symmetrical conditions, which seems realistic for representing slabs supported on columns equally spaced in both orthogonal directions. However, in practice, th ...
Magazine of Concrete Research2011Surface DBD’s and plasma-flow interaction
Christoph Hollenstein, Peter Ott, Pénélope Leyland, Philip Peschke, Sami Goekce, Samantha Pavon
Surface Dielelectric Barrier Discharges (DBD) are becoming very attractive in the field of flow control technologies for their promising effects on stabilising separating flows, at least at low speeds under the so-called ionic wind effect. Numerous experim ...
2010Fire endurance performance of cellular GFRP columns with water-cooling system
Thomas Keller, Christian Ludwig, Yu Bai
Experimental results on the fire endurance of full-scale glass fiber-reinforced polymer (GFRP) composite columns are reported in this paper. The pultruded four-cell profiles were first loaded to axial compression (uniform serviceability stress of 5 MPa) an ...
DEStech Publications Inc.2010New Connection System for Confined Concrete Columns and Beams. II: Theoretical Modeling
The concept of confined concrete has been widely accepted throughout the structural engineering field, such as the spiral, steel tube, or carbon fiber composite shell confined concrete, etc. In the present study, this concept has not only been used in the ...
2008Cellular composites based on continuous fibres and bioresorbable polymers
Biocompatible composites, whose porosity and fibre fraction call be tailored over a large range and whose mechanical resistance is comparable to that Of natural bone, were processed with poly(lactic acid) (PLA) and continuous glass fibres. The processing s ...
2008