Concept

Strain-rate tensor

Publications associées (243)

Study on the mixed dynamic recrystallization mechanism during the globularization process of laser-welded TA15 Ti-alloy joint under hot tensile deformation

In this article, the hot deformation mechanism of a laser-welded near a TA15 Ti-alloy joint was studied by hot tensile tests conducted at temperatures ranging from 800 degrees C to 900 degrees C with strain rates ranging from 1.0 x 10(-1) s(-1) to 1.0 x 10 ...

Elsevier2017

The flow stress evolution and grain refinement mechanisms during hot deformation of Al-Mg alloy

Roland Logé, Ke Huang

In this study, the hot deformation behavior of an Al-1% Mg alloy with very coarse initial grain size was investigated in terms of flow stress evolution and grain refinement mechanism. The large grain size was employed to study the traditional continuous dy ...

2017

Accounting for material parameters scattering in rolled zinc formability

Roland Logé

This paper focuses on the importance of taking into account scattering of material parameters (zinc in this example) to perform sheet metal forming simulations. The approach described in this paper is efficiently pragmatic to consider as inputs the materia ...

Elsevier Science Sa2017

Origins of the macroscopic symmetry breaking in centrosymmetric phases of perovskite oxides

Sina Hashemi Zadeh

Many perovskite materials experience a temperature-driven phase transition at the Curie temperature from a non-centrosymmetric polar ferroelectric phase to a paraelectric phase, where polarization is lost. The paraelectric phase is usually centrosymmetric ...

EPFL2017

Understanding and suppressing the near scrape-off layer heat flux feature in inboard-limited plasmas in TCV

Ivo Furno, Paolo Ricci, Holger Reimerdes, Benoît Labit, Christian Gabriel Theiler, Umar Sheikh, Richard Pitts, Jan Horacek, Federico Nespoli, Federico David Halpern, Cedric Kar-Wai Tsui, Kevin Henricus Annemarie Verhaegh, Roberto Maurizio

In inboard-limited plasmas, the scrape-off layer (SOL) shows two regions: the near SOL, extending a few mm from the last closed flux surface (LCFS), characterized by a steep gradient of the parallel heat flux radial profile, and a far SOL, typically some c ...

International Atomic Energy Agency2017

Laminated connections for structural glass applications under shear loading at different temperatures and strain rates

Alain Nussbaumer, Pieter Christian Louter, Manuel Santarsiero

Connections between structural glass components represent one of the main critical aspects of glass engineering. In the last years, a novel typology of adhesive connections has emerged, known as laminated adhesive connections. Two adhesive materials for la ...

Elsevier2016

Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions

Aurelio Muttoni, Miguel Fernández Ruiz, Darko Tasevski

In the present research, the uniaxial compression behaviour of concrete under different strain rates is investigated. The investigation emphasises the influence of the strain rate on the development of inelastic deformations due to nonlinear creep for high ...

11th fib International PhD Symposium in Civil Engineering2016

Strong surface effect on direct bulk flexoelectric response in solids

Alexander Tagantsev

In the framework of a continuum theory, it is shown that the direct bulk flexoelectric response of a finite sample essentially depends on the surface polarization energy, even in the thermodynamic limit where the body size tends to infinity. It is found th ...

Amer Inst Physics2016

Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles

Roland Logé

Dynamic and post-dynamic recrystallization kinetics were investigated during hot-working of Inconel 718 as a function of temperature,strain and strain rate in the single phase domain.The post-dynamic evolution was found to be extremely fast and impacting s ...

Elsevier2016

Miniaturized Dielectric Elastomer Actuator for Mechanical Stimulation of Monolayer Cell Cultures

Alexandre Poulin

This thesis advances the field of dielectric elastomer actuators (DEAs) through the development of device designs, fabrication processes, strain characterization technique and modelling tool. It provides the first demonstration that DEAs can be interfaced ...

EPFL2016

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search