Christian EnzChristian C. Enz (M84, S'12) received the M.S. and Ph.D. degrees in Electrical Engineering from the EPFL in 1984 and 1989 respectively. From 1984 to 1989 he was research assistant at the EPFL, working in the field of micro-power analog IC design. In 1989 he was one of the founders of Smart Silicon Systems S.A. (S3), where he developed several low-noise and low-power ICs, mainly for high energy physics applications. From 1992 to 1997, he was an Assistant Professor at EPFL, working in the field of low-power analog CMOS and BiCMOS IC design and device modeling. From 1997 to 1999, he was Principal Senior Engineer at Conexant (formerly Rockwell Semiconductor Systems), Newport Beach, CA, where he was responsible for the modeling and characterization of MOS transistors for the design of RF CMOS circuits. In 1999, he joined the Swiss Center for Electronics and Microtechnology (CSEM) where he launched and lead the RF and Analog IC Design group. In 2000, he was promoted Vice President, heading the Microelectronics Department, which became the Integrated and Wireless Systems Division in 2009. He joined the EPFL as full professor in 2013, where he is currently the director of the Institute of Microengineering (IMT) and head of the Integrated Circuits Laboratory (ICLAB).He is lecturing and supervising undergraduate and graduate students in the field of Analog and RF IC Design at EPFL. His technical interests and expertise are in the field of very low-power analog and RF IC design, semiconductor device modeling, and inexact and error tolerant circuits and systems.He has published more than 200 scientific papers and has contributed to numerous conference presentations and advanced engineering courses. Together with E. Vittoz and F. Krummenacher he is one of the developer of the EKV MOS transistor model and the author of the book "Charge-Based MOS Transistor Modeling - The EKV Model for Low-Power and RF IC Design" (Wiley, 2006). He has been member of several technical program committees, including the International Solid-State Circuits Conference (ISSCC) and European Solid-State Circuits Conference (ESSCIRC). He has served as a vice-chair for the 2000 International Symposium on Low Power Electronics and Design (ISLPED), exhibit chair for the 2000 International Symposium on Circuits and Systems (ISCAS) and chair of the technical program committee for the 2006 European Solid-State Circuits Conference (ESSCIRC). Since 2012 he has been elected as member of the IEEE Solid-State Circuits Society (SSCS) Administrative Commmittee (AdCom). He is also Chair of the IEEE SSCS Chapter of Switzerland.
Farzan JazaeriFarzan Jazaeri received his M.Sc. degree in 2009 from University of Tehran and his Ph.D. in electronic engineering from EPFL in 2015. He has been serving as Research Scientist at EPFL since 2015 and Senior RD Semiconductor Device Engineer in the Swatch Company since 2019.He is a recipient of the 2018 Electron Devices Society George E. Smith Award, the best talk award from MIXDES 2019 and the best paper awards from ESSDERC2018 and ESSDERC2019, and several other academic awards. He is also awarded an advanced Swiss National Science Foundation grant for two years fellowship in MIT and NASA. His doctoral thesis was recognized to be eligible for the IBM award in 2017. Dr. Jazaeri is currently research scientist and project leader in high level of international scientific collaborative activities at EPFL. His research activities on solid-state physics are focused on creation of the cryogenic temperature infrastructure necessary to operate the qubits for quantum computations(MOSQUITO), radiation-induced damages in advanced devices for the future high energy physics experiments at CERN (GigaRadMOST), Pinned Photodiodes for CIS, and modeling and characterization AlGaN-GaN heterostructure in collaboration with IMEC. Together with Dr. Sallese, he is the lead developer of EPFL HEMT MODEL for GaN HEMTs. He fully developed a new model (EPFL-JL Model) for the so-called nanowire FETs and was invited by Cambridge University Press to write a book on junctionless nanowire FETs, emerging nanoelectronic devices, already published since 2018. He serves as lead editor and reviewer for several scientific journals. He has been an invited keynote speaker at several international conferences and events. He is invited to MIXDES 2019 as a keynote speaker to address quantum bits and quantum computing architecture.From Jun 2009 to February 2010, he worked on designing and implementing SD/HD broadcast systems with SAMIM-RAYANEH Co., Tehran, Iran. Between March 2010 and November 2011 he worked as a SCADA expert in Tehran Regional Electric Co. (TREC), Tehran, Iran. From September 2010 to December 2011, he continued his research activities in nano-electronics in Tehran, Iran. In December 2011, he joined to Electron Device Modelling and Technology Lab (EDLab) and pursued his Ph.D. degree at EPFL. In 2015, he received his Ph.D. from Microsystems and Microelectronics department, Integrated Systems Laboratory (STI/IC) at EPFL, Lausanne, Switzerland.
Rakesh ChawlaOriginaire d'Inde, Rakesh Chawla y est né en 1947. Après avoir obtenu son doctorat en génie nucléaire à l'Imperial College de l'Université de Londres en 1970, il travaille jusqu'en 1972 à Winfrith comme Research Fellow de la United Kingdom Atomic Energy Authority.
De 1972 à 1978, il est engagé comme professeur assistant par l'Institut Indien de Technologie à Kanpur dans le cadre du programme Génie Nucléaire et Technologie. Depuis 1978, il travaille à l'Institut Paul Scherrer (PSI) à Würenlingen-Villigen dans le département de recherche Energie Nucléaire. En tant que chef de projet, il est responsable des divers travaux R&D, comme les études faites sur le réacteur de recherche PROTEUS.
En 1994, il est nommé professeur extraordinaire en physique des réacteurs au Département de physique de l'EPFL, poste qui comprend les activités d'enseignement à l'EPFL et la direction du Laboratoire de physique des réacteurs et de technique des systèmes au PSI. En 1997, il est nommé professeur ordinaire son enseignement porte sur les aspects physiques du génie nucléaire et les travaux pratiques utilisant le réacteur CROCUS à l'EPFL. Ses recherches actuelles comprennent les travaux expérimentaux et analytiques liés à la sécurité des systèmes avancés, au cycle de combustible et à la transmutation des déchets, ainsi qu'au comportement dynamique des centrales nucléaires.
Claudio BruschiniClaudio Bruschini holds an MSc in high energy physics from the University of Genova and a PhD in Applied Sciences from the Vrije Universiteit Brussel (VUB). He started his career with INFN (Italy, 1993), in the WA92 CERN collaboration (particle physics), and then moved to CERN as a Fellow in the European GP-MIMD2 project, attached to the NA48 collaboration (particle physics, parallel programming, 1994-1995). He then started his close collaboration with EPFL, first in the DeTeC (Demining Technology Center) project (sensors for landmine detection/humanitarian demining, 1996-1997). After DeTeC's end, he started the first of a series of fruitful collaborations with the Vrije Universiteit Brussel (VUB) on humanitarian demining related R&D (1998). This was followed by the EUDEM survey project (The European Union in Humanitarian Demining, 1998), the EUDEM2 three year EC sponsored support measure (www.eudem.info, 2001-2004), and the DELVE support action (www.delve.vub.ac.be, 2007). In parallel he started working within the EPFL's AQUA group (Advanced Quantum Architectures, Edoardo Charbon), on topics as diverse as ultrasonic sensors for in-air application, optical 3D and high speed 2D sensing, sensor networks, or tracking/motion capture systems, in particular for the preparation of research projects. This culminated in the European MEGAFRAME (www.megaframe.eu, FP6, 2006-2010, SPAD arrays and related in-pixel time stamping electronics in deep submicron CMOS technology) and SPADnet (www.spadnet.eu, FP7, 2010-2014, networked SPAD arrays for Positron Emission Tomography) projects, coordinated by EPFL-AQUA. As from 2009 he also worked with Dario Floreano on the management of the CURVACE Curved Artificial Compound Eyes FP7 project (www.curvace.org), coordinated by EPFL-LIS. He was also active with CHUV (Lausanne University Hospital) within EndoTOFPET-US (endoscopic PET) as well as on a CTI project devoted to the development of a new hand-held standalone tool for tracer-guided medical procedures. In 2014 he had also the pleasure of joining the EPFL ICLAB of Christian Enz during its ramp-up phase, collaborating on device related topics (SNF GigaRadMOST) and biomedical R&D (NanoTera WiseSkin). Claudio is now fully with EPFL’s Advanced Quantum Architecture (AQUA). He has also been active as independent scientific consultant, under the label CBR Scientific Consulting, on the preparation of (European) R&D project proposals and the execution of individual studies, and worked in 2006 for a local start-up as operations manager and R&D advisor.... but this is another story. An unauthorized early biography is available at http://lami.epfl.ch/team/claudiob/... Vincent Pierre LamirandAprès une thèse de doctorat sur la mesure de sections efficaces de réactions (p,n) sur accélérateur (IRSN, France), j'ai travaillé sur le développement de détecteurs et méthodes de mesure neutron pour la physique des réacteurs (CEA, France). Je suis en poste au LRS à l'EPFL depuis octobre 2014, en tenure track de l'Insitut Paul Scherrer depuis 2016, en tant que responsable des activités de recherche expérimentale sur nos installations.
Heinrich HofmannOriginaire de Mellingen (AG), Heinrich Hofmann est né en 1953. Après des études d'ingénieur en soudures (Ing. grad.) à Duisburg (D), et d'ingénieur en science des matériaux à la Technische Hochschule de Berlin, il obtient le titre de docteur ingénieur en 1983 pour une thèse dans le domaine des matériaux.De 1983 à 1985, il travaille comme assistant scientifique au Laboratoire de Technologie des Poudres de l'Institut Max Planck pour la science des matériaux à Stuttgart. En 1985 il entre au Centre de Recherche et Développement d'Alusuisse-Lonza à Neuhausen-am-Rheinfall, en tant qu'ingénieur consacré à la recherche dans l'étude et le développement des procédés de synthèse des poudres céramiques.En 1993 il entre à l'EPFL en tant que professeur extraordinaire et directeur du Laboratoire de technologie des poudres du Départmeent des matériaux. Son enseignement porte sur les céramiques I (procédés) et les phénomènes de transfert. Son domaine de recherche couvre la synthèse des poudres minérales, leur caractérisation et la modification des surfaces, ainsi que la mise en forme et le frittage. Ses recherches incluent aussi les matériaux nanostructurés (composites semi-conducteurs et polymères) et la métallurgie des poudres. Hofmann Heinrich, Prof. Dr.-Ing. got his PhD in Material Science with a thesis prepared at the Powder Metallurgy Laboratory at the Max Planck Institute in Stuttgart. In 1985 he joins the R&D center of Alusuisse-Lonza Services AG, at Neuhausen-am-Rheinfall. In 1993 he joins the Swiss Federal Institute of Technology as Professor and Director of the Powder Technology Laboratory at the Department of Materials science and engineering. His research area includes the synthesis of nanostructured materials based on nanoparticles and the modification of surfaces with nanoparticles using colloidal methods. The fields of application of such materials are medical and biological, (drug delivery, hyperthermia, cell separation, biosensors), electronics and sensors.
