Publications associées à Affaiblissement de propagation

Electromagnetic Radiation of Implantable Antennas

In the development of implantable bioelectronics, the establishment of efficient wireless RF links between implants and external nodes is crucial, providing substantial contributions to the advancement of medical diagnosis, therapies, and basic science. Im ...

EPFL2024

Reduced material loss in thin-film lithium niobate waveguides

Tobias Kippenberg, Mikhail Churaev, Zihan Li, Guanhao Huang, Di Zhu

Thin-film lithium niobate has shown promise for scalable applications ranging from single-photon sources to high-bandwidth data communication systems. Realization of the next generation high-performance classical and quantum devices, however, requires much ...

AIP Publishing2022

Beam Selection and Tracking for Amplify-and-Forward Repeaters

Andreas Peter Burg, Ruben Merz, Adrian Schumacher

Mobile network operators constantly have to upgrade their cellular network to satisfy the public's hunger for increasing data capacity. However, regulatory limits regarding allowed electromagnetic field strength on existing cell sites often limit or preven ...

IEEE2022

Joint Antenna-Channel Modelling for in-to-out-Body Propagation of Dairy Cows at 868 MHz

Denys Nikolayev

In this paper, for the first time, the in-to-out-body path loss between a capsule antenna placed inside the cows' rumen and a distant gateway was characterized at 868 MHz. Measurements were conducted on five different fistulated cows in a dairy barn. The i ...

IEEE2020

3.5 GHz Coverage Assessment with a 5G Testbed

Andreas Peter Burg, Ruben Merz, Adrian Schumacher

Today, cellular networks have saturated frequencies below 3 GHz. Because of increasing capacity requirements, 5th generation (5G) mobile networks target the 3.5 GHz band (3.4 to 3.8 GHz). Despite its expected wide usage, there is little empirical path loss ...

IEEE2019

Photoinitiator-free Laser Fabrication of Ultra-compact, Low-loss Waveguides in Polydimethylsiloxane

Demetri Psaltis, Christophe Moser, Ye Pu, Giulia Panusa, Jieping Wang

Owing to its excellent elasticity, wide spectral range of transparency, and outstanding chemical and thermal stability, polydimethylsiloxane (PDMS) is an elastomer of great technological importance, being widely used in the fabrication of microfluidic and ...

SPIE-INT SOC OPTICAL ENGINEERING2018

Propagation in Finite Lossy Media: An Application to WBAN

Anja Skrivervik

The Wireless Body Area Network (WBAN) has become an important part of the wireless communication world in the past decade leading to the need for efficient antennas for In-, On- and Off-Body links. The design of such antennas depends critically on the unde ...

Institute of Electrical and Electronics Engineers2015

On the MIMO Capacity for Distributed System under Composite Rayleigh/Rician Fading and Shadowing

José Luis Padilla de la Torre

Wireless channels are commonly affected by short-term fading and long-term fading (shadowing). The shadowing effects must be taken into account also when mobility is present in the wireless scenario. Using a composite fading model, the total channel capaci ...

Hindawi Publishing Corporation2015

Rigorous evaluation of propagation losses in arbitrarily shaped waveguide structures using boundary integral – resonant mode expansion and perturbation of boundary conditions

Michael Mattes

The accurate consideration of propagation losses in arbitrarily shaped waveguide-based structures is studied in this paper. For such a purpose, a software tool based on the perturbation of the boundary conditions on the waveguide metallic walls and on the ...

Inst Engineering Technology-Iet2014

Path-loss and car-body-effect characterization for smart tires communications at UWB and ISM bands

Pierre-André Farine, Cyril Botteron, Christian Robert, Gabriele Tasselli, Saeed Ghamari, Yi Guo

Next generation of smart tires will improve the safety and stability of the vehicle by monitoring road parameters, such as pavement and rolling conditions, with sensors placed on tire surface. Between the tread and the metal belt of the tire there are only ...

IEEE2014