Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur Graph Search.
Concept
Nacelle (aéronautique)
Résumé
A nacelle (nəˈsɛl ) is a streamlined container for aircraft parts such as engines, fuel, or equipment. When attached by a pylon entirely outside the airframe, it is sometimes called a pod, in which case it is attached with a pylon or strut and the engine is known as a podded engine. In some cases—for instance in the typical "Farman" type "pusher" aircraft, or the World War II-era P-38 Lightning—an aircraft cockpit may also be housed in a nacelle, rather than in a conventional fuselage.
Like many aviation terms, the word comes from French, in this case from a word for a small boat.
The Arado Ar 234 was one of the first operational jet aircraft with engines mounted in nacelles. During its development, the four engines had four distinct nacelles. They once their own landing gear wheel, but they were later combined to two nacelles with two engines each.
In recent years, General Electric and NASA have developed nacelles with chevron-shaped trailing edges to reduce the engine noise of commercial aircraft, using an experimental Boeing 777 as a test platform.
Usually, multi-engined aircraft use nacelles for housing the engines. Combat aircraft (such as the Eurofighter Typhoon) usually have the engines mounted within the fuselage. Some engines are installed in the aircraft wing, as in the De Havilland Comet and Flying Wing type aircraft. Engines may be mounted in individual nacelles, or in the case of larger aircraft such as the Boeing B-52 Stratofortress (pictured right) may have two engines mounted in a single nacelle. Nacelles can be made fully or partially detachable for holding expendable resources such as fuel and armaments. Nacelles may be used to house equipment that will only function remote from the fuselage, for example the Boeing E-3 Sentry radar is housed in a nacelle called a radome.
Edward Turner used the term to describe his styling device introduced in 1949 to tidy the area around the headlamp and instrument panel of his Triumph Speed Twin, Thunderbird and Tiger 100 motorcycles.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.