Publications associées à Propulsive efficiency

Locomotion of Sensor‐Integrated Soft Robotic Devices Inside Sub‐Millimeter Arteries with Impaired Flow Conditions

Diego Ghezzi, Mahmut Selman Sakar, Lorenzo Francesco John Noseda, Amit Yedidia Dolev, Adele Fanelli

One of the grand challenges in interventional cardiology and neuroradiology is to minimize the operation time and risk of damage during catheterization. These two factors drastically increase if the target location resides in small and tortuous vessels. Fl ...

Wiley2022

A Morphing Cargo Drone for Safe Flight in Proximity of Humans

Dario Floreano, Przemyslaw Mariusz Kornatowski, William John Stewart, Mir Alikhan Bin Mohammad Feroskhan

Delivery drones used by logistics companies today are equipped with unshielded propellers, which represent a major hurdle for in-hand parcel delivery. The exposed propeller blades are hazardous to unsuspecting bystanders, pets, and untrained users. One sol ...

2020

Comparing Direct and Indirect Thrust Measurements from Passively Fed and Highly Ionic Electrospray Thrusters

Herbert Shea, Simon Dandavino, Daniel George Courtney

Highly ionic beams of several hundred microampere per squared centimeter have been measured from porous glass ionic liquid electrospray sources fabricated using a conventional mill. The thrust output from three prototype devices, two emitting the ionic liq ...

American Institute of Aeronautics and Astronautics2016

Performance and Applications of Ionic Electrospray Micro-Propulsion Prototypes

Herbert Shea, Simon Dandavino, Daniel George Courtney

Electric propulsion systems using electrospray ion sources are a scalable and high specific impulse technology which could enable small spacecraft to perform high ΔV missions. This paper presents an overview of a recently developed source design which achi ...

2015

Influences of porous reservoir Laplace pressure on emissions from passively fed ionic liquid electrospray sources

Herbert Shea, Daniel George Courtney

Passively fed ionic liquid electrospray sources are capable of efficiently emitting a variety of ion beams with promising applications to spacecraft propulsion and as focused ion beams. Practical devices will require integrated or coupled ionic liquid rese ...

American Institute of Physics2015

Microfabricated electrospray emitter arrays with integrated extractor and accelerator electrodes for the propulsion of small spacecraft

Herbert Shea, Caglar Ataman, Simon Dandavino, Daniel George Courtney, Subha Chakraborty

Microfabricated electrospray thrusters could revolutionize the spacecraft industry by providing efficient propulsion capabilities to micro and nano satellites (1–100 kg). We present the modeling, design, fabrication and characterization of a new generation ...

Iop Publishing Ltd2014

Design and fabrication of the thruster heads for the MicroThrust MEMS electrospray propulsion system

Herbert Shea, Caglar Ataman, Simon Dandavino, Subha Chakraborty

Microfabricated electrospray thrusters are widely acknowledged as one of the most promising technologies for the propulsion of small spacecraft. Their relative simplicity, high efficiency (> 70%), low footprint (M < 500g, V < 10cm3) and large potential spe ...

2013

Economic and environmental assessment of alternative production methods for composite aircraft components

Véronique Michaud, Rémy Teuscher, Robert Andrew Witik, Fabrice Gaille

The use of carbon fibre reinforced plastics is steadily increasing in the aerospace industry as rising fuel costs and concerns over the environment push airframe manufacturers to improve aircraft efficiency. The high costs associated with manufacturing car ...

Elsevier2012

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Propulsive efficiency

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Locomotion of Sensor‐Integrated Soft Robotic Devices Inside Sub‐Millimeter Arteries with Impaired Flow Conditions

A Morphing Cargo Drone for Safe Flight in Proximity of Humans

Comparing Direct and Indirect Thrust Measurements from Passively Fed and Highly Ionic Electrospray Thrusters

Performance and Applications of Ionic Electrospray Micro-Propulsion Prototypes

Influences of porous reservoir Laplace pressure on emissions from passively fed ionic liquid electrospray sources

Microfabricated electrospray emitter arrays with integrated extractor and accelerator electrodes for the propulsion of small spacecraft

Design and fabrication of the thruster heads for the MicroThrust MEMS electrospray propulsion system

Economic and environmental assessment of alternative production methods for composite aircraft components

Scaling of density peaking in JET H-modes and implications for ITER

Graph Chatbot

Chattez avec Graph Search

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Locomotion of Sensor‐Integrated Soft Robotic Devices Inside Sub‐Millimeter Arteries with Impaired Flow Conditions

Comparing Direct and Indirect Thrust Measurements from Passively Fed and Highly Ionic Electrospray Thrusters

Performance and Applications of Ionic Electrospray Micro-Propulsion Prototypes

A Morphing Cargo Drone for Safe Flight in Proximity of Humans

Economic and environmental assessment of alternative production methods for composite aircraft components

Design and fabrication of the thruster heads for the MicroThrust MEMS electrospray propulsion system

Influences of porous reservoir Laplace pressure on emissions from passively fed ionic liquid electrospray sources

Scaling of density peaking in JET H-modes and implications for ITER

Microfabricated electrospray emitter arrays with integrated extractor and accelerator electrodes for the propulsion of small spacecraft