Publications associées à Imprimante

3D Printing of Customizable Transient Bioelectronics and Sensors

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Jürgen Brugger, Christophe Moser, Paul Delrot, Jorge Andres Madrid Wolff, Max Kollep, Damien Claude-Marie Loterie, Lorenz Hagelüken, Georgia Konstantinou, Antoine Vincent Boniface

Ceramics are highly technical materials with properties of interest for multiple industries. Precisely because of their high chemical, thermal, and mechanical resistance, ceramics are difficult to mold into complex shapes. A possibility to make convoluted ...

2022

Utilizing additive manufacturing and mass customization under capacity constraints

Ralf Seifert, Anna Timonina-Farkas, Rachel Agnès Laetitia Rosemonde Marie Lacroix

Additive manufacturing (AM), originally used for prototyping, is increasingly adopted for custom final part production across different industries. However, printing speed and production volume are two barriers for the adoption of AM for product customizat ...

SPRINGER2022

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto, Massimo Rosa

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Hubert Girault, Horst Pick, Andreas Stephan Lesch, Milica Jovic, Victor Costa Bassetto, Yingdi Zhu, Bhawna Nagar

Inkjet printing of electrochemical sensors using a highly loaded mildly edge‐oxidized graphene nanosheet (EOGN) ink is presented. An ink with 30 mg/mL EOGNs is formulated in a mixture of N‐methyl pyrrolidone and propylene glycol with only 30 min of sonicat ...

2020

A 3D printed wearable device for sweat analysis

Sandro Carrara, Mahshid Alsadat Padash

This work presents a wearable microfluidic device for sweat analysis. The purpose of this device is to collect sweat from the skin and convey it to the sensor. The device is printed by a 3D printer with Multi-Jet Modelling (MJM) technology using flexible m ...

IEEE2020

Gravure printed Ag/conductive polymer electrodes and simulation of their electrical properties

Frank Nüesch, Jakob Heier, René Uwe Schneider

In this paper, some practical issues related to the manufacturing, and design criteria related to the application in devices of a hybrid silver grid/poly (3,4-ethylenedioxythiophene) semi-transparent electrode are discussed. The electrodes are fabricated b ...

SPRINGER LONDON LTD2019

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Imprimante

3D Printing of Customizable Transient Bioelectronics and Sensors

The physics of 3D printing with light

Cartesian robot gripper

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics

Utilizing additive manufacturing and mass customization under capacity constraints

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

A 3D printed wearable device for sweat analysis

Gravure printed Ag/conductive polymer electrodes and simulation of their electrical properties

Graph Chatbot

Chattez avec Graph Search

Cartesian robot gripper

3D Printing of Customizable Transient Bioelectronics and Sensors

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Utilizing additive manufacturing and mass customization under capacity constraints

The physics of 3D printing with light

Highly Loaded Mildly Edge‐Oxidized Graphene Nanosheet Dispersions for Large‐Scale Inkjet Printing of Electrochemical Sensors

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

A 3D printed wearable device for sweat analysis

Gravure printed Ag/conductive polymer electrodes and simulation of their electrical properties

Tomographic Volumetric Additive Manufacturing of Silicon Oxycarbide Ceramics