Publications associées à Strontium 90

Analysis of reactivity worths of burnt PWR fuel samples measured in LWR-PROTEUS Phase II using a CASMO-5 reflected-assembly model

Mathieu Hursin, Hakim Ferroukhi, Daniel Jerôme Siefman

The reactivity loss of PWR fuel with burnup has been investigated experimentally by measuring the reactivity worths of highly-burnt fuel samples in a PWR test lattice in the framework of the LWR-PROTEUS Phase II program. Seven UO2 samples cut from fuel rod ...

2017

Surface Kinetics of Titanium Isopropoxide in Chemical Vapor Deposition of Titanium Dioxide and Barium Titanate

Michael Oliver Reinke

All chemical vapor deposition (CVD) processes rely on the adsorption and decomposition of precursors on a substrate to deposit the desired material. The growth rate of the film is determined by the surface kinetics of the utilized precursor molecules and g ...

EPFL2016

Interfacial Complexation Reactions of Sr2+ with Octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine Oxide for Understanding Its Extraction in Reprocessing Spent Nuclear Fuels

Hubert Girault, Yu Lu, Thomas James Stockmann, Zhifeng Ding

The complexation reactions between strontium (Sr2+) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) were studied at the aqueous vertical bar 1,2-dichloroethane (w vertical bar DCE) and aqueous vertical bar room-temperature ionic liqui ...

2011

Validation of 134Cs, 137Cs and 154Eu single ratios as burnup monitors for ultra-high burnup UO2 fuel

Rakesh Chawla, Stefano Caruso, Fabian Jatuff

A measurement station has been built for the non-destructive investigation of burnt fuel rod segments through high-resolution gamma spectrometry. Four UO2 pressurised water reactor fuel rod segments with different burnup levels between 50 and 100GWd/t and ...

Elsevier2007

Use of Dipicolinate-Based Complexes for Producing Ion-Imprinted Polystyrene Resins for the Extraction of Yttrium-90 and Heavy Lanthanide Cations

Rosario Scopelliti, Jean-Claude Bünzli, Anne-Sophie Chauvin, François Bochud

Highly selective separation of yttrium (and lanthanides) is of interest for the design of radiopharmaceuticals, and an efficient method based on the ion-imprinting concept is proposed here. The synthesis and structural, thermodynamic and photophysical char ...

2006