Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The mechanical loss and dynamic modulus temperature spectra of two 18-carat white gold alloys, Au58%Cu24%Pd18% without (grade A) and with alloying additions (grade B), were measured in the 400-1000 K temperature range. A peak interpreted as a Zener relaxat ...
The fracture properties of the tempered martensitic steel Eurofer97, which is among the main candidates for fusion power plant structural applications, were studied with two sizes of pre-cracked compact specimens (0.35T C(T) and 0.87T C(T)). The fracture t ...
Copper and its alloys generally display a severe reduction in ductility between roughly 300 and 600 degrees C, a phenomenon variously called 'intermediate temperature embrittlement' or 'ductility trough behaviour'. This review of the phenomenon begins by p ...
Growth directions and crystallographic orientations of solidification microstructures have been measured in Al-Zn alloy near the eutectic composition. Al dendrites in Al-92 wt.% Zn alloy were found to grow along the I 10) directions while Zn dendrites in A ...
Pulse plating of nickel-tungsten alloys has been studied from two citrate ammonia based model electrolytes containing either an excess of nickel or an excess of tungsten. The alloy composition and current efficiency were determined for pulse periods rangin ...
The formation of twinned dendrites (feathery grains) in binary Al-Zn, Al-Mg, Al-Cu and Al-Ni alloys has been studied in specimens directionally solidified under identical thermal conditions, i.e. G approximate to 100 K cm(-1), v approximate to 1 mm s(-1), ...
Two different methods for estimating the corrosion resistance of low alloy stainless steels are compared: critical pitting temperature according to a modified ASTM G150 with a low chloride concentration (0.1M), and pitting potentials from polarisation curv ...
This paper describes the microstructure, tensile properties and Charpy impact resistance of a reduced activation oxide dispersion strengthened ferritic steel Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) produced by mechanical alloying of a pre-alloyed, gas atomised steel ...
Gamma titanium aluminide (γ-TiAl) based alloys are very interesting materials for structural applications at elevated temperatures owing to the combination of high specific strength, good oxidation, creep and fatigue resistance. However, their relatively p ...
A phenomenological modelling approach has been developed for the description of die massive and lamellar microstructures which form in gamma-TiAl alloys at high and moderate cooling rates, respectively. The nucleation of both massive and lamellar gamma is ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2008