Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
Thick-film materials are very advantageous for piezoresistive pressure and force sensors because of ease of processing, reliability and low cost. The standard substrate material used with thick-film technology for sensing is alumina, but its elastic modulu ...
Alloys based on the Sn-0.7Cu-xNi system are potential Pb-free solders. In this paper we report on the solidification characteristics and microstructures of Sn-0.7Cu alloys containing 0-1,000 ppm nickel. The microstructural observations show that increasing ...
First-principles, spin-polarized local-density-functional calculations are used to model interstitial iron (Fei) and its complexes with substitutional aluminum in dilute SixGe1−x alloys (x
Uniform Material Law (UML) is a handy and user-friendly method since only the tensile strength data of the material is needed for estimation of the strain-life curve, in contrast to other methods, such as four-point correlation method, universal slopes met ...
Aluminum zinc alloys constitute an important class of wrought alloys, the so-called 7000 series, and are also widely used as anti-corrosion coatings of steel sheets. They are also interesting from a more fundamental point of view because zinc, a hexagonal ...
The mechanical response of the reinforced active alloy Incusil (TM) ABA (R)-SiC is studied. Specimens with up to 27 vol.% SiC particles are produced and tested in tension. The presence of the reinforcement leads to modifications in the alloy mechanical res ...
Many commercially important alloys such as Fe-C, Fe-Ni, Cu-Zn, Cu-Sn and Ti-Al exhibit peritectic transitions on solidification. In the two-solid phase region of peritectic metallic systems, a wide spectrum of microstructures has been revealed during direc ...
In the design of tubular truss bridges, engineers have found the fatigue performance of the joints to be a critical aspect. In looking for ways to improve this performance, the use of residual stress-based post-weld treatments has been suggested. Although ...
From specific heat measurements of Ta + Ti alloyed Bronze Route multifilamentary Nb3Sn wires, a wide, nearly symmetric overall distribution of T-c can be determined. This is apparently in contradiction with the almost linear decrease of the Sn content towa ...
