Vehicle emission standard | EPFL Graph Search

Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?

Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.

Découvrez-en plus sur les applications Graph.

Emission standards are the legal requirements governing air pollutants released into the atmosphere. Emission standards set quantitative limits on the permissible amount of specific air pollutants that may be released from specific sources over specific timeframes. They are generally designed to achieve air quality standards and to protect human life. Different regions and countries have different standards for vehicle emissions. Many emissions standards focus on regulating pollutants released by automobiles (motor cars) and other powered vehicles. Others regulate emissions from industry, power plants, small equipment such as lawn mowers and diesel generators, and other sources of air pollution. The first automobile emissions standards were enacted in 1963 in the United States, mainly as a response to Los Angeles' smog problems. Three years later Japan enacted their first emissions rules, followed between 1970 and 1972 by Canada, Australia, and several European nations. The early standards mainly concerned carbon monoxide (CO) and hydrocarbons (HC). Regulations on nitrogen oxide emissions (NOx) were introduced in the United States, Japan, and Canada in 1973 and 1974, with Sweden following in 1976 and the European Economic Community in 1977. These standards gradually grew more and more stringent but have never been unified. There are largely three main sets of standards: United States, Japanese, and European, with various markets mostly using these as their base. Sweden, Switzerland, and Australia had separate emissions standards for many years but have since adopted the European standards. India, China, and other newer markets have also begun enforcing vehicle emissions standards (derived from the European requirements) in the twenty-first century, as growing vehicle fleets have given rise to severe air quality problems there, too. An emission performance standard is a limit that sets thresholds above which a different type of vehicle emissions control technology might be needed.

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées (2)

Concepts associés (33)

Cours associés (25)

Séances de cours associées (260)

MOOCs associés (1)

Pollution atmosphérique : impacts, études et règlements ENG-474: Impact studies

Explore l'impact de la pollution de l'air, y compris le smog hivernal et estival, les COV, les émissions, les effets sur la santé et les règlements juridiques.

Lignes spectrales : Transitions moléculaires MOOC: The Radio Sky I: Science and Observations

Couvre les transitions moléculaires dans le Radio Univers, en mettant l'accent sur l'oxygène, le carbone et les émissions de CO.

Caractérisation du catalyseur II

Explore les techniques avancées de caractérisation des catalyseurs, y compris les changements de fréquence d'étirement du CO sur les surfaces Pt et les techniques de réflexion pour l'étude des événements aux interfaces.

The Radio Sky I: Science and Observations

Be captivated by the exotic objects that populate the Radio Sky and gain a solid understanding of their physics and the fundamental techniques we use to observe them.

CFD Simulations Of Pollution Control Systems: DPF and SCR

Peter Loveday

New EU and US emissions regulations require the development of advanced after- treatment systems for non-road diesel engine exhausts. To help develop these at Liebherr Machines Bulle, the use of CFD has been adopted. The pro ject used two main models: one for the dosing of fuel for the regeneration of the Diesel Particulate Filter (HC Doser model) and one for the Selective Cataylitic Reduction system (SCR model). The HC Doser model was validated against published data and in-house experimental results. Good agreement was found in all cases. The SCR model was validated against published data only, showing good qualitative agreement -spatial distribution and spray formation- but the quantitative measures - N H3 and H N N C O concentrations- still need further adjustment. Validation against in-house experimental results was not possible as the necessary experiments have not yet been carried out. After validation, the DPF model was used to evaluate and improve specfic exhaust geometry configurations at LMB. Selected case studies are presented to show the appli- cability of the models to the design process, and the derived advantages. Using the DPF model, basic research was undertaken to investigate the ifluence of the static mixer's geometry on the performance of the system during regeneration. A new mixer geometry was designed which reduced the pressure drop and increased the uniformity of the HC distribution

2011

Alternative techniques to assess road traffic emissions

Luis Carlos Belalcazar Ceron

Today, one of the most important environmental problems in urban areas is air pollution. According to the World Health Organization, air pollution represents a serious risk to human health in many cities of the world. Road traffic is one of the main sources of pollution in cities. Besides, vehicular emissions are released in close proximity to population, increasing the adverse health effects. Road traffic emissions are highly uncertain in developing countries. Existing techniques to assess this source of pollution are expensive and not always accurate. It results difficult for a city from the developing world to afford these techniques and thus, adequate abatement strategies can not be adopted. It is essential to develop methodologies to reduce these uncertainties to manage air quality more effectively. This PhD thesis aims to develop and to implement alternative techniques to assess road traffic emissions. This work focuses on the study of Volatile Organic Compounds (VOCs), this family of pollutants have not been sufficiently studied in cities. The developed techniques were tested during an intensive measuring campaign conducted in Ho Chi Minh City (HCMC), Vietnam. The motorcycles are the main mode of transport in HCMC, this means of transport has contributed to the progress of this rapidly developing city. The high levels of air pollution, the elevated number of motorcycles and especially the limited funding available, made HCMC an interesting place to test the developed methodologies. In a first stage the results of the measuring campaign were used to assess the roadside levels of pollution in HCMC. During the HCMC campaign, 19 C2-C6 VOCs were monitored on-line at roadside level together with other important pollutants. Results show that there is a severe air pollution problem in HCMC. The pollutants that are produced by road traffic are identified by means of a Principal Components Analysis (PCA) receptor Model. The PCA shows that all the VOCs monitored (except isoprene) are produced by motorcycles. It is necessary to develop and to encourage the use of alternative modes of transport in HCMC. The use of the on-line roadside pollutants monitoring together with the PCA showed to be a good first approach to assess the road traffic emissions. This is an affordable technique and it is strongly recommended to use it in cities with limited financial means to study the air pollution problem. This work also presents a new method to estimate road traffic emission factors (EFs). This method is based on a long term tracer experiment conducted during the HCMC campaign. The results of the HCMC tracer experiment were used together with traffic counts and pollutant measurements to calculate the dispersion factors and afterwards the EFs. Estimated EFs for HCMC are within the range of EFs estimated in other studies. Additionally, a Computational Fluid Dynamics Model (CFD) is used to critically evaluate the proposed methodology. The evaluations show that it is possible to accurately estimate the EFs from tracer studies. The methodology proposed here results in an interesting and promising alternative to estimate the EFs. All the techniques presented in this work offer several advantages. Data obtained serve for different purposes at the same time and their use can provide valuable information for urban air quality assessment. For example, concentrations of pollutants are determined at roadside level, as well as their evolution in time, this information is useful for exposure studies. Roadside monitoring can be used to identify the pollutants that are directly emitted by road traffic. Results from the tracer study can be used to estimate the EFs under real urban conditions and to validate dispersion models which in turn can be used in the future to evaluate abatement strategies for such streets.

EPFL2009

The course is an introduction to heterogeneous catalysis for environmental protection and energy production. It focusses on catalytic exhaust gas cleaning as well as catalytic systems relevant for gas

This course examines the supply of energy from various angles: available resources, how they can be combined or substituted, their private and social costs, whether they can meet the demand, and how t

The course equips students with a comprehensive scientific understanding of climate change covering a wide range of topics from physical principles, historical climate change, greenhouse gas emissions

The model year (sometimes abbreviated "MY") is a method of describing the version of a product which has been produced over multiple years. The model year may or may not be the same as the calendar year in which the product was manufactured. Automobiles in the United States and Canada are identified and regulated by model year, whereas other markets use production date (month/year) to identify specific vehicles, and model codes in place of the "year" (model year) in the North American make-model-year identifier.

vignette|En 2013, l'Organisation mondiale de la santé a reconnu que la pollution de l'air extérieur est un cancérigène certain. vignette|Les émissions de monoxyde de carbone, de soufre, de suies et de particules liées à la combustion du charbon ont probablement été la première source de pollution majeure de l'air, dès le début de l'ère industrielle. Les transports ferroviaires y contribuaient largement, davantage par la construction des infrastructures (notamment la fabrication des rails) que du fait des émanations des locomotives.