Êtes-vous un étudiant de l'EPFL à la recherche d'un projet de semestre?
Travaillez avec nous sur des projets en science des données et en visualisation, et déployez votre projet sous forme d'application sur GraphSearch.
Concept
Cartridge (firearms)
Résumé
A cartridge or a round is a type of pre-assembled firearm ammunition packaging a projectile (bullet, shot, or slug), a propellant substance (usually either smokeless powder or black powder) and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for the practical purpose of convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often informally used to refer to a complete cartridge, the correct usage only refers to the projectile.
Cartridges can be categorized by the type of their primers – a small charge of an impact- or electric-sensitive chemical mixture that is located: at the center of the case head (centerfire); inside the rim (rimfire); inside the walls on the fold of the case base that is shaped like a cup (cupfire, now obsolete); in a sideways projection that is shaped like a pin (pinfire, now obsolete); or a lip (lipfire, now obsolete); or in a small nipple-like bulge at the case base (teat-fire, now obsolete). Only the centerfire and rimfire survive in mainstream usage today.
Military and commercial producers continue to pursue the goal of caseless ammunition. Some artillery ammunition uses the same cartridge concept as found in small arms. In other cases, the artillery shell is separate from the propellant charge.
A cartridge without a projectile is called a blank; one that is completely inert (contains no active primer and no propellant) is called a dummy; one that failed to ignite and shoot off the projectile is called a dud; and one that ignited but failed to sufficiently push the projectile out of the barrel is called a squib.
The cartridge was invented specifically for breechloading firearms. Prior to its invention, the projectiles and propellant were carried separately and had to be individually loaded via the muzzle into the gun barrel before firing, then have a separate ignitor compound (from a slow match, a small charge of gunpowder in a flash pan, or a percussion cap) to set off the shot.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.