Unconventional wind turbines

Unconventional wind turbines are those that differ significantly from the most common types in use. the most common type of wind turbine is the three-bladed upwind horizontal-axis wind turbine (HAWT), where the turbine rotor is at the front of the nacelle and facing the wind upstream of its supporting turbine tower. A second major unit type is the vertical-axis wind turbine (VAWT), with blades extending upwards, supported by a rotating framework. Due to the large growth of the wind power industry, many wind turbine designs exist, are in development, or have been proposed. The variety of designs reflects ongoing commercial, technological, and inventive interests in harvesting wind resources more efficiently and in greater volume. Some unconventional designs have entered commercial use, while others have only been demonstrated or are only theoretical concepts. Unconventional designs cover a wide gamut of innovations, including different rotor types, basic functionalities, supporting structures and form-factors. Nearly all modern wind turbines use rotors with three blades, but some use only two blades. This was the type used at Kaiser-Wilhelm-Koog, Germany, where a large experimental two-bladed unit—the GROWIAN, or Große Windkraftanlage (big wind turbine)—operated from 1983 to 1987. Other prototypes and wind turbine types were manufactured by NedWind. The Eemmeerdijk Wind Park in Zeewolde, Netherlands uses only two-bladed turbines. Wind turbines with two blades are manufactured by Windflow Technology, Mingyang Wind Power, GC China Turbine Corp and Nordic Windpower,. The NASA wind turbines (1975–1996) each had 2-blade rotors, producing the same energy at lower cost than three-blade rotor designs. Nearly all wind turbines place the rotor in front of the nacelle when the wind is blowing (upwind design). Some turbines place the rotor behind the nacelle (downwind design). This design has the advantage that the turbine can be made to passively align itself with the wind, reducing cost.