Publications associées à Hyperstatisme

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Model uncertainties in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures

Aurelio Muttoni, Alain Nussbaumer, Xhemsi Malja

For the dimensioning and assessment of structures, it is common practice to compare action effects with sectional resistances. Extensive studies have been performed to quantify the model uncertainty on the resistance side. However, for statically indetermi ...

Ernst & Sohn2024

Structural topology exploration through policy-based generation of equilibrium representations

Corentin Jean Dominique Fivet, Ioannis Mirtsopoulos

Mainstream approaches to design spatial architectural forms that are structurally relevant consist either in adapting well-known and catalogued conventional types or in searching for close-to-optimum solutions of well-defined problems. Few means exist to e ...

2023

Exploration of static equilibrium representations; policies and genetic algorithms

Corentin Jean Dominique Fivet, Ioannis Mirtsopoulos

Design exploration consists in browsing the design space and through the incremental generation of diverse design candidates increases creativity and diversity. When integrated into the early stages of the structural design process, the task is expected to ...

CRC Press2022

Reduced-order Models for Simulating Coupled Geometric Instabilities in Steel Beam-columns Under Inelastic Cyclic Straining

Alexander Riley Hartloper

Numerical models that can simulate coupled geometric instabilities in steel beam-columns are required for the seismic assessment of certain steel moment-resisting frames. Reliably simulating coupled instabilities requires that the steel material is precise ...

EPFL2021

Extended Integrated Force Method for the analysis of prestress-stable statically and kinematically indeterminate structures

Gennaro Senatore, Yafeng Wang

This paper presents a new force method to predict the structural response of statically and kinematically indeterminate systems that can be stabilized through prestress, i.e. prestress-stable structures. This new force method, here named Extended Integrate ...

2020

Design and Structural Optimization of Topological Interlocking Assemblies

Mark Pauly, Florin Isvoranu, Peng Song

We study assemblies of convex rigid blocks regularly arranged to approximate a given freeform surface. Our designs rely solely on the geometric arrangement of blocks to form a stable assembly, neither requiring explicit connectors or complex joints, nor re ...

2019

Grammar-based generation of trusses within non-convex domains

Corentin Jean Dominique Fivet, Ioannis Mirtsopoulos

A force-driven generative grammar rule is proposed as a design exploration method for planar networks in static equilibrium within non-convex domains. The aim is to enrich the catalog of unconventional structural typologies. Empty or partial networks in eq ...

fib2019

Synthesis of minimum energy adaptive structures

Gennaro Senatore

This paper presents the formulation of a new methodology to design adaptive structures. This design method synthesises structural configurations that are optimum hybrids between a passive and an active structure. An optimisation scheme searches for an opti ...

2019

Experimental investigation of multi-span post-tensioned glass beams

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

This paper presents a study on post-tensioned glass beams in a statically indeterminate system. In order to increase the safety of structural glass beams, ductile reinforcement can be added to glass beam sections providing secondary load carrying mechanism ...

Springer Nature2017