A granular model of solidification as applied to hot tearing
Publications associées (80)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
A method is developed to model continuum (finite element) and discrete [kinetic Monte Carlo (kMC)] diffusion occurring simultaneously in connected regions of space. The two regions are coupled across ail interface using ail iterative domain-decomposition a ...
Granular matter submitted to external perturbations exhibits various behaviors depending on the vibration intensity: when strongly vibrated, the granular system has a fluid aspect, whereas under low intensity perturbations, it is in a quasi-solid phase. In ...
At early age, ultra high performance fibre reinforced concretes (UHPFRC)undergo significant volumes changes (thermal deformation and autogenous shrinkage)related to their composition. These deformations can be restrained by different elements respective to ...
During casting of aluminum alloys, the partially solidified material is submitted to thermally induced strains that can lead to severe casting defects, such as hot tearing. In this work, carried out in the frame of the European project VIR[CAST], the rheol ...
We present an atomistic study of the plastic deformation mechanisms occurring in columnar structures of nanocrystalline Ni, with particular emphasis on the process of dislocation emission form the grain boundaries. The samples are constructed with grain bo ...
Mechanisms responsible for the embrittlement of leaded "free-machining" copper alloys at intermediate temperatures (i.e. around 400 °C) are examined using a combination of microstructural and mechanical characterization. Tensile tests are conducted on pure ...
Hot tearing, a severe defect occurring during solidification, is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of an insufficient liquid feeding to compensate for the volumetric change. In ...
Semi-continuous direct-chill (DC) casting of aluminium ingots suffers from a very frequent defect which can lead to a strong decrease in productivity: hot tearing. This phenomenon takes place in the mushy state (i.e., at solid fractions, gs, lower than uni ...
Optical and transmission electron microscopy have been used to investigate the microdeformation mechanisms in thin films of amorphous semi-aromatic polyamides with different chemical structures and chain lengths. In the chosen range of test temperatures (b ...