Irradiation-induced embrittlement of a 2.25Cr1Mo steel
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The microstructure, chemical and phase composition of the hard Ni-P-Ti layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high-resolution ...
The controlled tuning of the characteristic dimensions of two-dimensional arrays of block-copolymer reverse micelles deposited on silicon surfaces is demonstrated. The polymer used is polystyrene-block-poly(2-vinylpyridine) (91500-b-105000 g mol–1). Revers ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
This work presents the preliminary results on application of mineral sacrificial layer that is prepared to structure LTCC (low temperature co-fired ceramic). The proposed method suggests utilization of a sacrificial paste, which remains "permanent" during ...
AISI 304 and 316 stainless steels of two purity levels that have been irradiated with high energy protons up to 0.3 dpa and neutrons in a high flux reactor up to 7.5 dpa were investigated in terms of irradiation induced mechanical properties and microstruc ...
A method for preparing and observing clay platelets for size and shape analysis using scanning electron microscopy (SEM) was developed. Samples of the clay platelets were prepared by polyelectrolyte-assisted adsorption onto a pyrolytic graphite surface. Th ...
Charpy impact tests were performed on martensitic/ferritic (MF) steels T91, F82H, Optifer-V and Optimax-A/-C irradiated in SINQ Target-3 up to 7.5 dpa and 500 appm He in a temperature range of 120-195 degrees C. Results demonstrate that for all the four ki ...
A novel C-Nafton/Fe-ion structured fabric capable of mediating Orange II decomposition in Fenton-immobilized photoassisted reactions is presented. The catalyst preparation requires the right balance between the amount of the Nafion necessary to protect the ...
Neutron-irradiation-induced embrittlement of a 2.25Cr1Mo steel is investigated by means of small punch testing along with scanning electron trucroscopy. There is an apparent irradiation-induced embrittlement effect after the steel is irradiated at about 40 ...
In this paper, the RBS phenomenon is described and experimental results concerning Bragg reflectors and microcavities grown on silicon substrates by molecular beam epitaxy are presented. This spectroscopy is not sensitive to (i) the lateral fluctuation of ...
