Interaction between a surface dielectric barrier discharge and transonic airflows
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
An algorithm is proposed for the simulation of unsteady viscous stratified compressible flows. The advantage of the method is its capability to deal with a broad range of subsonic Mach numbers, including nearly incompressible flows, with a single modelling ...
Low Pressure Plasma Spraying (LPPS) processes use a DC plasma jet expanding at low pressure for fast deposition of dense coatings in a controlled atmosphere. The LPPS technology is widely used industrially in particular in the aeronautics and medical indus ...
Low pressure plasma spraying (LPPS) is a thermal spraying technique that has found a niche for low oxidation products. It uses a low pressure environment (i.e:, chamber pressure between 2 and 90 kPa) and yields supersonic plasma jets. The enthalpy probe te ...
Two reciprocating probe systems, at the same poloidal position at the top of the JET torus but toroidally separated by 180degrees, have been used to measure parallel flow in the scrape-off layer (SOL) of lower single-null, diverted plasmas. One system uses ...
An electrostatic charge can be left on an insulating substrate after RF plasma processing, even though the plasma and surfaces are globally neutral. High voltages and breakdown can then occur when the substrate is manipulated. If the substrate is not a per ...
EDGE2D simulations show that high SOL flows can be generated when an additional radial convective transport is applied in the SOL and pedestal region along with a 'ballooning-like' poloidal variation in transport. This model produces an inward particle flu ...
Large-eddy simulation (LES) is a very promising technique for the numerical computation of unsteady turbulent flows, and seems to be the perfect tool to simulate the compressible air flow around a high-speed train in a tunnel, providing unsteady results fo ...
Good understanding of the different phases of involved plasma-chemistry is essential for the development of non thermal plasma technologies for pollution control. These techniques are often based on the production of radicals from dissociation parent gases ...
Regions of positive slope in the pressure-discharge characteristics are one of the major concerns in design and operation of centrifugal pumps, as they are limiting the admissible operating range to values above the critical discharge. The industrial pump ...
The plasma created during electrical discharge machining is investigated with imaging and spatially-resolved optical emission spectroscopy. Analysis of the pre-breakdown duration shows that the breakdown is of stochastic nature. Due to the presence of gas ...
