Fracture behavior of low-density replicated aluminum alloy foams
Publications associées (65)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In bypass graft surgery, surgeons have turned to synthetic materials such as polyethylene terephthalate (Dacron) and expanded polytetrafluoroethylene (ePTFE) when lacking sufficient and suitable arteries or veins for the procedure. However, due to their lo ...
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
The extremely low permeability of Ultra-High Performance Fibre Reinforced Concretes (UHPFRC)associated to their outstanding mechanical properties make them especially suitable to locally "harden" reinforced concrete structures in critical zones subjected t ...
The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 μm were manipulated with an atomic force microscopy tip ...
Mechanical and fracture behaviors of wood are defined by the morphology and mechanical properties of wood fibers and their bonding medium. Parallel orientation of wood fibers makes them the most influential microstructural elements from the mechanical poin ...
A fairly simple experimental setup has been designed for testing the resistance of the mushy zone of alloys during solidification under tensile conditions. It has been used to study the effect of coalescence among the solid grains at a late stage of solidi ...
Damage induced by desiccation (i.e. drying and cracking) is a ubiquitous issue in waste storage engineering. The fundamental mechanisms of the phenomenon of cracking during drying and the ways to control or avoid it are still elusive. This paper presents t ...
Formulating effective coatings for use in nano- and biotechnology poses considerable technical challenges(1). If they are to provide abrasion resistance, coatings must be hard and adhere well to the underlying substrate(2). High hardness, however, comes at ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...