Intermediate temperature grain boundary phenomena in copper alloys
Publications associées (343)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel i ...
A new 3D coupled hydro-mechanical granular model that simulates hot tearing formation in metallic alloys is presented. The hydro-mechanical model consists of four separate 3D modules. (I) The Solidification Module (SM) is used for generating the initial so ...
For environmental reasons, lead has been banned from microelectronic solder materials since the adoption of the RoHS legislation in 2006. A large number of investigations have lead to the development of new lead-free solder materials like the SnAgCu alloy ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
In the present work, LBE (lead-bismuth eutectic) embrittlement effects on ferritic/martensitic (FM) steels have been studied by conducting slow-strain-rate tensile (SSRT) testing on T91 and F82H steels either in Ar or in liquid LBE after irradiation to dos ...
A high-temperature anelastic relaxation peak in the mechanical loss spectrum of 18-carat yellow gold polycrystals is analysed and interpreted as due to grain boundary sliding accommodated predominantly by elastic deformation of the grains. The characterist ...
A relaxation peak has been observed in the internal friction spectrum of 18-carat AuAgCu yellow gold alloys at about 750K for 0.5Hz. It is related to the presence of grain boundaries, since it is absent in the spectrum of single crystals. For the 14-carat ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2012
Copper-based composites reinforced with alumina particles are produced by two different pro- cesses, namely gas pressure driven infiltration of a porous alumina preform and a two-step in-situ process developed in the course of this work. The resulting comp ...
Microstructure evolution has been studied in the nickel-based superalloy PER®72 subjected to hot torsion, to annealing below the primary γ' solvus temperature and to annealing at a supersolvus temperature, with a special emphasis on grain size and twin con ...
In situ X-ray diffraction experiments performed on nanocrystalline Ni demonstrate an evolution of intergranular stress with plastic deformation that is different from coarse-grained counterparts. Using a crystal plasticity model, the X-ray diffraction foot ...