Linear Parameter Varying Iterative Learning Control with application to a Linear Motor System
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In some applications, it is interesting to know the position of a BLDC Motor at standstill. This paper propose one solution using the saturation property of the motor. Principle, simulation and measures are presented. The results of industrial applications ...
An original electrical AC loss experimental set-up is presented. For loss comparison purpose, Ic and exponent n are measured with a DC magnetic field between 2 and 400 mT applied perpendicularly to the axis of the sample using a specially designed electrom ...
This paper describes an open-loop torque control for a three-phase direct reluctance motor which can generate high torque at low speed. The command strategy presente in this paper consists of feeding the motor with three-phase sinewave currents. The torque ...
The number of brushless DC (BLDC) motor applications has increased significantly, essentially due to reduced costs of semiconductors and permanent magnets, but also because of the emergence of new control strategies, such as closed-loop and sensorless cont ...
Usually, each phase of the direct reluctance motor is fed separately by its own inverter producing a squarewave phase current depending on the rotor position. In the present work, a star-connection of the three stator phases is used and the direct reluctan ...
NOVELTY - For control mono-phase or multiphase machines in motor or generating mode with or without pulse width modulation. USE - Control of electrical rotating machines. ADVANTAGE - Can be used for control of single phase and three phase machines. DETAILE ...
This paper presents a simulator of the manufacturing process of induction motors. Its main purpose is to provide feedback in the form of motor cost and production scheduling during the process of motor design. The paper concentrates on modeling and simulat ...
Institute of Electrical and Electronics Engineers1994
A theoretical analysis of temperature distribution on an artificial ventricular assist device is performed using three-dimensional finite element modelling. The model consists of 6000 solid elements representing all the ventricle components. In order to fi ...
NOVELTY - After disconnection from normal control (3) a pulse generator (4) sends positive and negative pulses to a motor winding R. The response currents are measured (5) from voltages (Vpr,Vnr) which appear after a fixed time on a neutral resistor (2) an ...
For the first time we have characterized a micromotor driven by a piezoelectric PZT (PbZrxTi1-xO3) thin film. Sputter and sol-gel techniques have been applied for the deposition of the PZT films onto a silicon stator membrane, which is 20-30 mu m thick and ...
