Publication
The microcontainer shape in electropolymerization on bubbles
Résumé
We investigated the microcontainer shape in electropolymerization of polypyrrole (PPy) on bubbles using real-time microradiography. We revealed the existence of a "deformation force" at the three-phase boundary among gas (bubble), liquid (electrolyte), and solid (PPy). As the deformation force increases, the microcontainer shape gradually changes from spherical to elliptical and then to cylindrical. The force is proportional to the polymerization rate that is enhanced by the applied voltage and monomer concentration.
Source officielle
À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Proximité ontologique
Concepts associés (39)
Deformation (engineering)
In engineering, deformation refers to the change in size or shape of an object. Displacements are the absolute change in position of a point on the object. Deflection is the relative change in external displacements on an object. Strain is the relative internal change in shape of an infinitesimally small cube of material and can be expressed as a non-dimensional change in length or angle of distortion of the cube. Strains are related to the forces acting on the cube, which are known as stress, by a stress-strain curve.
Fluage
Le fluage est le phénomène physique qui provoque la déformation irréversible différée (c'est-à-dire non instantanée) d’un matériau soumis à une contrainte constante (notée ), même inférieure à la limite d'élasticité du matériau, pendant une durée suffisante. Le fluage ainsi que la relaxation de contrainte sont deux méthodes en quasi statique de caractérisation des matériaux visqueux (cas du béton). vignette|100px|Essai de fluage à chaud.
Force (physique)
Une force modélise, en physique classique, une action mécanique exercée sur un objet ou une partie d'un objet par un autre objet ou partie d'objet. L'ensemble des forces appliquées à un objet a pour effet de lui communiquer une accélération ou de le déformer. Introduit antérieurement , le concept de force a été précisé en 1684 par Isaac Newton, qui en a fait l'un des fondements de la mécanique newtonienne. Le concept de force est ancien, mais il a mis longtemps à obtenir une nouvelle définition utilisable.
Publications associées (64)
Organic matters, but inorganic matters too: column examination of elevated mercury sorption on low organic matter aquifer material using concentrations and stable isotope ratios
Sorption of mercury (Hg) in soils is suggested to be predominantly associated with organic matter (OM). However, there is a growing collection of research that suggests that clay minerals and oxides are also important solid phases for the sorption of solu ...
2024Interactions of Cavitation Bubbles with Deformable Interfaces
Cavitation is a topic that has long been of interest due to the large and growing range of applications associated with it. This is mainly because the collapse of cavitation bubbles releases a considerable amount of energy into the surrounding environment. ...
EPFL2023On the Maximum Power Density of Implanted Antennas within Simplified Body Phantoms
Anja Skrivervik, Zvonimir Sipus, Mingxiang Gao
With the application requirements of wireless technology in implantable bioelectronics, knowledge of the fundamental limits for implanted antennas becomes critical. In this work, we investigated the variation of maximum power density within simplified body ...
IEEE2022MOOCs associés (7)
Sorption and transport in cementitious materials
Learn how to study and improve the durability of cementitious materials.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.