Force (physique)

Résumé

Une force modélise, en physique classique, une action mécanique exercée sur un objet ou une partie d'un objet par un autre objet ou partie d'objet. L'ensemble des forces appliquées à un objet a pour effet de lui communiquer une accélération ou de le déformer. Introduit antérieurement , le concept de force a été précisé en 1684 par Isaac Newton, qui en a fait l'un des fondements de la mécanique newtonienne. Histoire Le concept de force est ancien, mais il a mis longtemps à obtenir une nouvelle définition utilisable. En effet, à la différence de grandeurs physiques telles que la longueur ou la masse, qui sont représentées par des grandeurs scalaires, les forces peuvent être représentées par des vecteurs. Les représentations vectorielles des forces doivent être distinguées des forces proprement dites. Certains philosophes et physiciens, dits opérationnalistes ou instrumentalistes au sujet des forces, nient qu'il existe des forces : selon eux, les vecteurs de forces utilisé

Source officielle

https://fr.wikipedia.org/wiki/Force_(physique)

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Publications associées (100)

Publications associées

Chargement

Personnes associées (56)

Personnes associées

Chargement

Unités associées (33)

Unités associées

Chargement

Concepts associés (337)

Concepts associés

Chargement

Cours associés (261)

Le but du cours de physique générale est de donner à l'étudiant les notions de base nécessaires à la compréhension des phénomènes physiques. L'objectif est atteint lorsque l'étudiant est capable de prévoir quantitativement les conséquences de ces phénomènes avec des outils théoriques appropriés.

The student will acquire the basis for the analysis of static structures and deformation of simple structural elements. The focus is given to problem-solving skills in the context of engineering design.

Students will learn the principles of mechanics to enable a better understanding of physical phenomena, such as the kinematics and dyamics of point masses and solid bodies. Students will acquire the capacity to quantitatively analyze these effects with the appropriate theoretical tools.

Afficher plus

Cours associés

Chargement

Séances de cours associées (1 000)

Séances de cours associées

Chargement

Contactless optical trapping and manipulation of nanoparticles utilizing SIBA mechanism and EDL force

Mahdi Sahafi

On-chip optical tweezers based on evanescent fields overcome the diffraction limit of the free-space optical tweezers and can be a promising technique for developing lab-on-a-chip devices. While such trapping allows for low-cost and precise manipulation, it suffers from unavoidable contact with the device surface, which eliminates one of the major advantages of the optical trapping. Here, we use a 1D photonic crystal cavity to trap nanoparticles and propose a novel method to control and manipulate the particle distance from the cavity utilizing a self-induced back-action (SIBA) mechanism and electrical-double-layer (EDL) force. It is numerically shown that a 200 nm radius silica particle can be trapped near the cavity with a potential well deeper than 178k(B)T by 1 mW of input power without any contact with the surface and easily moved vertically with nanometer precision by wavelength detuning. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

2019

Chargement

An Adaptive Landing Gear for Extending the Operational Range of Helicopters

Tobias Löw

Conventional skid or wheel based helicopter landing gears severely limit off-field landing possibilities, which are crucial when operating in scenarios such as mountain rescue. In this context, slopes beyond 8° and small obstacles can already pose a substantial hazard. An adaptive landing gear is proposed to overcome these limitations. It consists of four legs with one degree of freedom each. The total weight was minimized to demonstrate economic practicability. This was achieved by an innovative actuation, composed of a parallel arrangement of motor and brake, which relieves the motor from large impact loads during hard landings. The loads are alleviated by a spring-damper system acting in series to the actuation. Each leg is individually force controlled for optimal load distribution on compliant ground and to avoid tipping. The operation of the legs is fully autonomous during the landing phase. A prototype was designed and successfully tested on an unmanned helicopter with a maximum take-off weight of 78 kg. Finally, the implementation of the landing gear concept on aircraft of various scales was discussed.

IEEE2019

Chargement

On surface tension modelling using the level set method

The paper describes and compares the performance of two options for numerically representing the surface tension force in combination with the level set interface-tracking method. In both models, the surface tension is represented as a body force, concentrated near the interface, but the technical implementation is different: the first model is based on a traditional level set approach in which the force is distributed in a band around the interface using a regularized delta function, whereas in the second, the force is partly distributed in a band around the interface and partly localized to the actual computational cells containing the interface. A comparative Study, involving analysis of several two-phase flows with moving interfaces, shows that in general the two surface tension models produce results of similar accuracy. However, in the particular case of merging and pinching-off of interfaces, the traditional level set model of surface tension produces an error that results in non-converging solutions for film-like interfaces (i.e. ones involving large contact areas). In contrast, the second model, based on the localized representation of the surface tension force, displays consistent first-order convergence.

Wiley-Blackwell2009

Chargement