Thermal-Behavior Of Visible Algainp-Gainp Ridge Laser-Diodes
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Fiber Bragg gratings fabricated in pristine SMF-28e fibers using pulsed ArF-excimer and cw 244-nm Ar+ laser were annealed using tempering rates from 0.0038 to 0.25 K/s. Demarcation energy mapping allowed for the determination of the frequency factors and t ...
We present a compact frequency-stabilized laser system locked to the Rubidium absorption line of a micro-fabricated reference cell. A printed circuit board (PCB) is used to carry all the components and part of the electronics, and low-temperature co-fired ...
The post-fabrication control of evanescent tunnelling in photonic crystal molecules is demonstrated through the combination of selective infiltration and oxidation. By laser non thermal oxidation, we reduce the photonic coupling by more than 30% while by m ...
Selective Laser Sintering (SLS) and Selective Laser Melting (SLM) are parent Additive Manufacturing processes using a laser to solidify metallic, ceramic, polymer or composite powders. During the process, the object is built layer by layer. A laser source ...
The high charge PHIN photo injector is studied at CERN as an electron source for the CLIC Test Facility (CTF3) drive beam as an alternative to the present thermionic gun. The objective of PHIN is to demonstrate the feasibility of a laser-based electron sou ...
The wavelength tuning properties of a tunable external cavity laser based on multiplexed volume holographic gratings and a commercial micromirror device are reported. The 3x3x3 cm(3) laser exhibits single mode operation in single or multi colors between 77 ...
We present our evaluation of a compact laser system made of a 795 nm VCSEL locked to the Rubidium absorption line of a micro-fabricated absorption cell. The spectrum of the VCSEL was characterised, including its RIN, FM noise andline-width. We optimised th ...
With the improvement of acceleration techniques, the intrinsic emittance of the cathode has a strong impact on the final brightness of a free electron laser. The systematic studies presented in this paper demonstrate for the first time in a radiofrequency ...
Purpose – Since pulsed lasers are mainly used in selective laser sintering (SLS) – contrarily to selective laser melting (SLM) – only the exterior of the powder particles is molten while their core stays solid. The purpose of this paper is to investigate t ...
The localized growth of carbon nanotube structures has potential in many applications such as interconnects, field emitters and sensors. Using a laser to locally heat the substrate offers a highly versatile process compatible with a broad range of substrat ...
