Nanopore Characterization and Optical Modeling of Transparent Polycrystalline Alumina
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders ...
As a necessary step toward the quantitative prediction of hot tearing defects, a three-dimensional stress–strain simulation based on a combined finite element (FE)/discrete element method (DEM) has been developed that is capable of predicting the mechanica ...
Since the end of the last century, Cu damascene integration scheme has been the favoured choice for advanced interconnect technologies. Indeed, due to the lowest Cu bulk resistivity and to it higher resistance to electromigration, performances enhancement ...
Transparent polycrystalline alumina (PCA) is a promising replacement for sapphire. Its optical properties however are highly dependent on the grain size and residual porosity which need to be controlled for real inline transmittances (RIT), that are high e ...
A comprehensive model for the electronic transport in polycrystalline ZnO:B thin films grown by low pressure chemical vapor deposition is presented. The optical mobilities and carrier concentration calculated from reflectance spectra using the Drude model ...
Despite many years of intensive research there still remain many unresolved questions in powder and ceramic technology. A majority of these issues are linked to interfacial phenomena of atomic scale origin, which makes their experimental investigation very ...
The effect of the bulk microstructure (grain size distribution, grain boundary composition on the oxygen transport properties of La0.5Sr0.5FeO3membranes was investigated. For this purpose, samples with different microstruct ...
High temperature plasticity of fine-grained ceramics (ZrO2, Al2O3, etc) is usually associated with a grain boundary sliding process. The aim of the present research is then to improve the high-temperature mechanical strength of polycrystalline zirconia (3Y ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2008
The present study reports on the preparation and structural characterization of dense NaNbO3 ceramics with ultrafine grain size. Nanocrystalline raw powders obtained via microemulsion mediated synthesis were consolidated to green compacts, sinterforged to ...
The prediction of material microstructure is of great interest to the material designers since the property and performance of materials depend strongly on their microstructures. In this work, a Monte Carlo approach is used to investigate the normal grain ...
