Signatures of quantum criticality in the thermopower of Ba(Fe1-xCox)(2)As-2

We demonstrate that the thermopower (S) can be used to probe the spin fluctuations (SFs) in proximity to the quantum critical point (QCP) in Fe-based superconductors. The sensitivity of S to the entropy of charge carriers allows us to observe an increase of S/T in Ba(Fe1-x Co-x)(2)As-2 close to the spin-density-wave (SDW) QCP. This behavior is due to the coupling of low-energy conduction electrons to two-dimensional SFs, similar to heavy-fermion systems. The low-temperature enhancement of S/T in the Co substitution range 0.02 < x < 0.1 is bordered by two Lifshitz transitions, and it corresponds to the superconducting region, where a similarity between the electron and nonreconstructed hole pockets exists. The maximal S/T is observed in proximity to the commensurate-to-incommensurate SDW transition, for critical x(c) approximate to 0.05, close to the highest superconducting T-c. This analysis indicates that low-T thermopower is influenced by critical spin fluctuations which are important for the superconducting mechanism.

Thermopower as a Unique Tool to Probe Quantum Phase Transitions

Stevan Arsenijevic

In my thesis, transport measurements such as resistivity and, more importantly, thermopower S, were used to explore the phase diagram of bad metals. Bad metals are electronically correlated systems whose ground state lies close to a quantum phase transition. By tuning the control parameters, such as temperature (T ), magnetic field (B), hydrostatic pressure (p) or chemical substitution (x), we can induce phase transitions between the various electronic, magnetic and structural phases. Here, the thermopower is presented as a unique tool for probing quantum phase transition because it is a measure of the entropy of conducting electrons. The main part of the thesis is dedicated to the study of Fe-based superconductors (FeSC) discovered in 2008. Their parent compound has an antiferromagnetic (AF) ground state, where the itinerant electrons form a spin-density wave (SDW), a periodic modulation of spin density. This coincides or is preceded by a structural, tetragonal-to-orthorhombic transition. The nesting between the electron and hole Fermi surface is believed to be the driving mechanism for the SDW state. By changing the structural or chemical properties the AF ground state of FeSC is suppressed, giving way to superconductivity (SC). The remaining antiferromagnetic fluctuations above the transition can provide a glue for SC pairing. Here, the analysis of the thermopower S/T of BaFe1−xCoxAs2 (BFCA) in the x-T phase diagram shows the signatures of the spin fluctuation which have a dome-like dependence and follow the trend of superconducting Tc . The logarithmic increase of S/T upon decreasing T is ascribed to the proximity of the spin-density-wave quantum critical point. It can be understood as an increase of entropy due to the incommensurate AF spin fluctuations. We can ascribe the high values of thermopower in BFCA at intermediate- and room-temperatures to the influence of low-T quantum criticality. To probe the response of the electronic system in FeSC to structural changes, we performed measurements under pressure of the parent compound BaFe2As2 (BFA), the SC electron-doped BFCA, and hole-doped Ba1−xKxFe2As2 (BKFA). In the parent compound pressure suppresses the structural/SDW transition, similar to the effect of doping. For doped systems, in order to describe the behavior of thermopower in the high-T range (above 100K) we used a semi-metallic two-band model which was fitted to the data in order to extract the pressure dependence of the band parameters. In both doping cases the effect of pressure was similar, an increase of the band overlap and of the effective number of charge carriers. With this model we can explain the high-T , x and p dependence of thermopower in both electron- and hole-doped BFA. In a structurally simpler Fe-chalcogenide Fe1+yTe1−xSex compound, the excess of Fe has a Kondo-like influence on the charge carriers which dramatically changes the physics of the normal state. To probe the normal state, pressure, doping, magnetic Fe-excess concentration (y) and temperature were used as control parameters. At low-T a characteristic upturn of resistivity (ρmag ) is observed, followed by an increase of thermopower (Smag ), which we identify as the magnetic contribution caused by the spin-flip scattering events. Increasing the y resulted in an increase of ρmag , and a decrease of Smag , which is in agreement with the behavior of canonical Kondo-systems. Pressure suppresses the magnetic contribution to transport, thus increasing the itinerancy of the system. MnSi is another system in which the sensitivity of thermopower to entropy brings new information related to the complex magnetic structure. Pressure was used to drive the system from a helically ordered, canonical Fermi-liquid (FL) phase with T 2-resistivity to the intrinsically disordered, non-Fermi-liquid (NFL) phase above pc with T3/2-dependence. Our contour plot of S/T demonstrated how powerful the thermopower technique is, by reproducing the whole previously established T -p phase diagram. At the phase transition from the magnetically-ordered FL phase to the disordered NFL, the thermopower is dramatically enhanced. We bring useful information about the mysterious partial order (PO) phase inside the NFL phase, previously detected only by neutron scattering. The fluctuating helices scenario can describe the observed increase of entropy/thermopower in the PO phase. At ambient pressure, close to the helical transition of MnSi, a moderate magnetic field can stabilize the skyrmion lattice - the lattice of topological magnetic whirls, vortices. We observe a signature of the skyrmion lattice as a minute drop in thermopower. It is located exactly in the same region of the T − B phase diagram where an increase in magnetoresistance and Hall effect was reported previously. This feature originates from the additional scattering of conducting electrons on magnetic vortices, while the change in S is dominated by the decrease of entropy as the stable skyrmion lattice is formed. Overall, resistivity was used to confirm the established phase diagram, while thermopower, as an interesting and not sufficiently understood technique, was used to probe the sensitive changes of the charge carriers at the Fermi surface. We explored various phases showing how useful thermopower is to probe the entropy of electronic system on the verge of quantum phase transition.

EPFL2012

Huge critical current density and tailored superconducting anisotropy in SmFeAsO0.8F0.15 by low-density columnar-defect incorporation

Yihan Jia, Janusz Andrzej Karpinski, Sergiy Katrych

Iron-based superconductors could be useful for electricity distribution and superconducting magnet applications because of their relatively high critical current densities and upper critical fields. SmFeAsO0.8F0.15 is of particular interest as it has the highest transition temperature among these materials. Here we show that by introducing a low density of correlated nano-scale defects into this material by heavy-ion irradiation, we can increase its critical current density to up to 2 x 10(7) A cm(-2) at 5 K-the highest ever reported for an iron-based superconductor-without reducing its critical temperature of 50 K. We also observe a notable reduction in the thermodynamic superconducting anisotropy, from 8 to 4 upon irradiation. We develop a model based on anisotropic electron scattering that predicts that the superconducting anisotropy can be tailored via correlated defects in semimetallic, fully gapped type II superconductors.

Nature Publishing Group2013

Spectroscopic Studies on Iron-Chalcogenide Superconductors

Ping-Hui Lin

Superconductivity in F-doped LaFeAsO, Tc= 26 K was first reported by Kamihara et al in 2008. Following that, more iron-based superconductors, e.g., (Ba,K)Fe2As2, LiFeAs, and Fe1+yTe1-xSex were discovered. The new class of high Tc superconductors have attracted a tremendous interest. Iron-chacogenides do not involve arsenic but share several common features with the iron-pnictides. They are characterized by FeCh layers which are isostructural to the FeAs or FeP layers in the iron-pnictides. The electronic structure near the Fermi energy derives from the Fe 3d orbitals. Both families exhibit a spin density wave (SDW) ground state. Se substation for Te in FeTe suppresses the SDW and leads to superconductivity. From a more practical point of view, the iron-chacogenides have a rather simple structure, and they are less toxic and easier to obtain in large single crystals than the arsenide counterparts. For all these properties, the iron-chalcogenides are ideal compounds for angle-resolved photoemission (ARPES) studies. In this thesis, I have investigated by ARPES the normal state electronic structure of Fe1+yTe1-xSex superconductors with various doping level. I have studied the multi-orbital Fermi surface of Fe1+yTe1-xSex, mainly by means of polarized photons from synchrotron radiation sources. Individual bands of different orbital characters could then be distinguished by exploiting ARPES selection rules. I have also investigated the 3D electronic structure of these materials by performing normal emission measurements as a function of the incident photon energy. Namely, by using photon energies as large as 150 eV, I have performed an unusually broad ARPES survey of momentum space. The data reveal two inequivalent Fermi contours at nominally equivalent Gamma points in different Brillouin zones. The observed periodicity corresponds to a unit cell containing only one Fe atom, rather than the standard tetragonal unit cell containing two Fe atoms. I also observe a strong and selective suppression of spectral weight around perpendicular lines at the corner of the Brillouin zone.