Pre-buckling and post-buckling failure at web-flange junction of pultruded GFRP beams
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper discusses the findings of an experimental program that was conducted to investigate the behaviour of extended shear tab beam-to-column and beam-to-girder connections that are commonly used in North America. The laboratory results showed that ext ...
The objective of this study was to test the hypothesis that mechanical properties of artificial osteochondral constructs can be improved by a tissue-engineered zone of calcification at the bone-hydrogel interface. Experimental push-off tests were performed ...
Extended shear tab connections (either in full-depth or partial-depth configurations) have been widely used to connect simply supported beams to the web of supporting girders. Full-scale laboratory tests of extended beam-to-girder shear tab connections dem ...
In the present paper the experimental results of in-plane shear tests on masonry walls subject to cyclic loads under constant axial load and externally strengthened with composite grid embedded in a cementitious matrix are synthetized. The experimental res ...
Extended shear tab connections are widely used to connect beams to the webs of girders. In the full-depth configuration of extended beam-to-girder shear tabs, the shear plate is typically fillet welded to the web, as well as to the top and bottom flanges o ...
Single plate shear tab connections are a simple means to connect beams to their supporting members. The tab is fillet-welded to the supporting column in the fabrication shop, and then field bolted to the beam web on the construction site. Sit-uations may a ...
American Institute of Steel Construction (AISC)2016
Based on current fiber-reinforced polymer (FRP) composite construction principles, FRP decks fall into two categories: pultruded decks and sandwich decks. Sandwich decks comprise face sheets and either honeycombs or foams reinforced with internal FRP webs ...
The work and findings reported in the paper are interesting to the discussers and will advance the understanding of the shear-failure mechanism of reinforced concrete (RC) beams. Some details need further discussion and clarification. In many cases, shear ...
Arch-shaped members are used in many reinforced concrete structures such as tunnels, bridges, silos, or offshore constructions. They are generally designed to carry significant axial forces, and, in most cases, are not provided with transverse reinforcemen ...
The strengthening method characterized by the application of composite grid reinforced mortar layers onto the surface of masonry walls is a quite new technique and, thus, still requires deep experimental and numerical investigation. This strengthening tech ...
