SPADnet: Embedded coincidence in a smart sensor network for PET applications

Claudio Bruschini, Edoardo Charbon, Gabor Nemeth
Elsevier, 2014
Article

Résumé

n this paper we illustrate the core technologies at the basis of the European SPADnet project (www.spadnet.eu), and present the corresponding first results. SPADnet is aimed at a new generation of MRI-compatible, scalable large area image sensors, based on CMOS technology, that are networked to perform gamma-ray detection and coincidence to be used primarily in (Time-of-Flight) Positron Emission Tomography (PET). The project innovates in several areas of PET systems, from optical coupling to single-photon sensor architectures, from intelligent ring networks to reconstruction algorithms. In addition, SPADnet introduced the first computational model enabling study of the full chain from gamma photons to network coincidence detection through scintillation events, optical coupling, etc.

Official source

https://infoscience.epfl.ch/record/191221?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

, , ,

The SPADnet FP7 European project is aimed at a new generation of fully digital, scalable and networked photonic components to enable large area image sensors, with primary target gamma-ray and coincidence detection in (Time-of-Flight) Positron Emission Tomography (PET). SPADnet relies on standard CMOS technology, therefore allowing for MRI compatibility. SPADnet innovates in several areas of PET systems, from optical coupling to single-photon sensor architectures, from intelligent ring networks to reconstruction algorithms. It is built around a natively digital, intelligent SPAD (Single-Photon Avalanche Diode)-based sensor device which comprises an array of 8x16 pixels, each composed of 4 mini-SiPMs with in situ time-to-digital conversion, a multi-ring network to filter, carry, and process data produced by the sensors at 2Gbps, and a 130nm CMOS process enabling mass-production of photonic modules that are optically interfaced to scintillator crystals. A few tens of sensor devices are tightly abutted on a single PCB to form a so-called sensor tile, thanks to TSV (Through Silicon Via) connections to their backside (replacing conventional wire bonding). The sensor tile is in turn interfaced to an FPGA-based PCB on its back. The resulting photonic module acts as an autonomous sensing and computing unit, individually detecting gamma photons as well as thermal and Compton events. It determines in real time basic information for each scintillation event, such as exact time of arrival, position and energy, and communicates it to its peers in the field of view. Coincidence detection does therefore occur directly in the ring itself, in a differed and distributed manner to ensure scalability. The selected true coincidence events are then collected by a snooper module, from which they are transferred to an external reconstruction computer using Gigabit Ethernet. We will detail the SPADnet core technologies as well as the latest project achievements in all project areas.

Spie-Int Soc Optical Engineering2014

Chargement

Small-animal and endoscopic PET detector modules based on multichannel digital silicon photomultipliers

Augusto Carimatto, Edoardo Charbon, Esteban Venialgo Araujo

In time-of-flight (TOF) positron emission tomography (PET), the coincidence resolving time (CRT) has a strong influence on the overall performance. Multichannel digital silicon photomultipliers (MD-SiPMs) are able to obtain several timestamps for gamma photon timemark estimation. Using this feature, the CRT is improved and the system robustness is significantly increased by utilizing multiple photoelectron timestamps. In addition, the PET instrumentation chain is simplified because of the intrinsic digitization and integrated functionality of the MD-SiPM. The main objective of this work is to demonstrate the possibility of building a complete highly-miniaturized PET detector module for endoscopic applications. In addition, we show that it's possible to operate simultaneously several MD-SiPM array chips in order to build a small-animal PET detector modules. We present the implementation of two PET detector modules that are based on MD-SiPMs: a small animal and an endoscopic PET detector modules. The small animal PET detector module consists of 2×4 monolithic MD-SiPM array chips. In addition, this module includes a low-cost field programmable gate array (FPGA), a temperature controlling system and data transfer interfaces. The endoscopic PET detector module comprises a single monolithic array of 9×18 MD-SiPM and a small form-factor FPGA. In this module, a remarkable level of compactness is achieved. Eventually, a thermal characterization and a preliminary radiation measurement are presented.

2017

Chargement

Toward a Full-Flexible and Fast-Prototyping TOF-PET Block Detector Based on TDC-on-FPGA

Edoardo Charbon, Esteban Venialgo Araujo

Typically, a time-of-flight (TOF) positron emission tomography (PET) block detector is built using application-specific integrated circuits (ASICs), since they integrate a high number of channels at a reasonable power consumption and into a small area. However, ASICs' flexibility is limited and prototyping times are long because a semiconductor fabrication process is required in every design iteration. Alternatively, fast terminal (FT) silicon photomultipliers (SiPMs) require a simplified analog front-end in order to achieve TOF accuracy. In addition, field-programmable gate arrays (FPGAs) can allocate time-to-digital converters as well as complex digital readout logics. In this paper, we propose building TOF-PET block detectors based on FPGAs, FT-SiPMs, and minimal amount of off-the-shelf components. In this way, TOE-PET accuracy is achieved with a full-flexible and fast prototyping solution. We evaluated the coincidence resolving time, performance degradations due to channel multiplexing, energy resolution, and scintillator pixel encoding performance of SiPM arrays utilizing the proposed approach. Experimental results show minimal timing degradations, when multiplexing FTs. Moreover, simulation results show a low reduction in the singles count rate of multiplexed channels at typical brain-PET radioactive doses.

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

Chargement

, , ,

Spie-Int Soc Optical Engineering2014