Load profileIn electrical engineering, a load profile is a graph of the variation in the electrical load versus time. A load profile will vary according to customer type (typical examples include residential, commercial and industrial), temperature and holiday seasons. Power producers use this information to plan how much electricity they will need to make available at any given time. Teletraffic engineering uses a similar load curve. In a power system, a load curve or load profile is a chart illustrating the variation in demand/electrical load over a specific time.
Production décentralisée (énergie)Aussi appelé production distribuée (calque de l'anglais), la production décentralisée est la production d'énergie électrique à l'aide d'installations de petite capacité raccordées au réseau électrique à des niveaux de tension peu élevée : basse ou moyenne tension. thumb|upright=1.2|Éolienne urbaine de 2 m de diamètre, puissance 1,75 kW à 14 m/s, Saint-Sébastien (Espagne), 2010. Spécialement développée pour obtenir un très faible niveau sonore. Hauteur du mât : 5,5 m, vitesse de démarrage : 2,5 m/s, durée de vie : 20 ans, conforme au code de l'urbanisme espagnol.
Chronologie de l'énergie solaire photovoltaïqueLe développement de l'énergie solaire photovoltaïque connaît une croissance exponentielle depuis plus de 20 ans à l’échelle mondiale. À partir des années 1990, l'énergie solaire photovoltaïque a évolué d'un simple marché de niche vers une source de production d'électricité à échelle industrielle. Durant sa phase initiale de développement, l'énergie des panneaux photovoltaïques, reconnue en tant que source d'énergie renouvelable prometteuse a bénéficié de subventions, notamment sous la forme de tarif de rachat, afin d'attirer les investissements.
Home energy storageHome energy storage devices store electricity locally, for later consumption. Electrochemical energy storage products, also known as "Battery Energy Storage System" (or "BESS" for short), at their heart are rechargeable batteries, typically based on lithium-ion or lead-acid controlled by computer with intelligent software to handle charging and discharging cycles. Companies are also developing smaller flow battery technology for home use.
Dynamic demand (electric power)Dynamic Demand is the name of a semi-passive technology to support demand response by adjusting the load demand on an electrical power grid. It is also the name of an independent not-for-profit organization in the UK supported by a charitable grant from the Esmée Fairbairn Foundation, dedicated to promoting this technology. The concept is that by monitoring the frequency of the power grid, as well as their own controls, intermittent domestic and industrial loads switch themselves on/off at optimal moments to balance the overall grid load with generation, reducing critical power mismatches.
Thermal energy storageThermal energy storage (TES) is achieved with widely different technologies. Depending on the specific technology, it allows excess thermal energy to be stored and used hours, days, months later, at scales ranging from the individual process, building, multiuser-building, district, town, or region. Usage examples are the balancing of energy demand between daytime and nighttime, storing summer heat for winter heating, or winter cold for summer air conditioning (Seasonal thermal energy storage).
Financial incentives for photovoltaicsFinancial incentives for photovoltaics are incentives offered to electricity consumers to install and operate solar-electric generating systems, also known as photovoltaics (PV). Governments offered incentives in order to encourage the PV industry to achieve the economies of scale needed to compete where the cost of PV-generated electricity is above the cost from the existing grid. Such policies were implemented to promote national or territorial energy independence, high tech job creation and reduction of carbon dioxide emissions which cause climate change.
Ressources et consommation énergétiques mondialesLes réserves mondiales prouvées d'énergie fossile pouvaient être estimées en 2020, selon l'Agence fédérale allemande pour les sciences de la Terre et les matières premières, à , dont 55 % de charbon, 25 % de pétrole et 19 % de gaz naturel. Ces réserves assurent de production au rythme actuel ; cette durée est très variable selon le type d'énergie : pour le pétrole, pour le gaz naturel, pour le charbon. Pour l'uranium, avec les techniques actuelles, elle serait de 90 à selon les estimations, et sa durée d'utilisation pourrait se compter en siècles en ayant recours à la surgénération.
Cadmium telluride photovoltaicsCadmium telluride (CdTe) photovoltaics is a photovoltaic (PV) technology based on the use of cadmium telluride in a thin semiconductor layer designed to absorb and convert sunlight into electricity. Cadmium telluride PV is the only thin film technology with lower costs than conventional solar cells made of crystalline silicon in multi-kilowatt systems. On a lifecycle basis, CdTe PV has the smallest carbon footprint, lowest water use and shortest energy payback time of any current photovoltaic technology.
Electricity retailingElectricity retailing is the final sale of electricity from generation to the end-use consumer. This is the fourth major step in the electricity delivery process, which also includes generation, transmission and distribution. Electricity retailing began at the end of the 19th century when the bodies which generated electricity for their own use made supply available to third parties. In the beginning, electricity was primarily used for street lighting and trams. The public could buy once large scale electric companies had been started.
