Effect of vanadium addition on the microstructure and mechanical properties of the ODS ferritic steels
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
This work presents a study of XRD measurements on the development of the (113) preferential orientation with film thickness for Ti0.67Al0.33N films grown on Si(100) substrates by pulsed DC magnetron sputtering. The buildup of (113) texture was observed usi ...
We study the structural, magnetic, and transport properties of LaAlO3/EuTiO3/SrTiO3 heterostructures grown by pulsed laser deposition. The samples are characterized in situ by electron diffraction and scanning probe microscopy and ex situ by transport meas ...
Nickel/ceramic solid oxide fuel cell anodes exhibit a dimensional instability when experiencing a reduction-oxidation cycle. As fuel is supplied on the anode side, the as-sintered nickel oxide phase (NiO) reduces to metallic Ni and then remains in this sta ...
Acquisition of three-dimensional (3D) spectral data is nowadays common using many different microanalytical techniques. In order to proceed to the 3D reconstruction, data processing is necessary not only to deal with noisy acquisitions but also to segment ...
It has been shown previously that the disproportionation of halogen-containing oxidants (e.g., HOCl, HOBr, and ClO2) is enhanced by a CuO-catalyzed process. In this study, the transformation of iodine during chlorination in the presence of CuO was investig ...
The formation of nickel oxide nanolayers by oxidizing Ni overlayers on Rh(111) has been investigated and their structures are reported as a function of the nickel coverage and oxygen pressure. Scanning tunneling microscopy (STM), low-energy electron diffra ...
The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...
Time-resolved in situ X-ray tomography combined with scanning electron microscopy was performed on an Al-Fe diffusion system at 973 K (700 A degrees C) to study the formation of the main intermetallic compounds occurring at the interface. After nucleation ...
