The influence of serrated flow on necking in tensile specimens
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Soare and Curtin (Acta Mater. 2008; 56:4091-4101, 4046-4061) have recently developed a model of dynamic strain aging in solute-strengthened alloys. Their constitutive law describes time-dependent solute strengthening using rate equations that can be calibr ...
Mechanical properties of nanostructures could be remarkably different from their bulk counterparts owing to scale effects, which have attracted considerable research interest in recent years. However, nanomechanics studies are hindered by the difficulties ...
The tensile properties of the high-chromium tempered martensitic reduced activation steel Eurofer97 were determined from tests carried out over a wide range of strain-rates on cylindrical specimens. The quasi-static tests were performed with a universal el ...
Welding is an important joining method for the work with metals. During the welding process, the material is heated and deforms plastically which leads a change in microstructure in the heat affected zone, to complex residual stress distributions, and dist ...
A multi-scale, computational design approach for aluminum sheet alloys, which includes key inputs from the electronic, atomistic, microstructural, and continuum length scales, is reviewed within the context of room and elevated temperature forming. Specifi ...
The effect of temperature on the crack onset strain (COS) of brittle coatings on polymer substrates was investigated through a series of temperature-controlled tensile tests carried out in situ under an optical microscope. It was observed that the failure ...
We perform two-dimensional dynamic fracture simulations of a specimen in biaxial tension, incorporating various distributions of pre-existing microcracks. The simulations consider the spatial distribution of flaws while modeling the discrete failure proces ...
The periodontal ligament (PDL) is a highly vascularized soft connective tissue. Previous studies suggest that the viscous component of the mechanical response may be explained by the deformation-induced collapse and expansion of internal voids (i.e. chiefl ...
The behavior of Pt thin films on polyimide foil was investigated through tensile and bending tests. They aimed at determining the stability of these conductive pathways when subject to deformation. Such films are used for the fabrication of sensors on plas ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
