Widely available active sites on Ni2P for electrochemical hydrogen evolution - insights from first principles calculations

Ligang Feng, Martin Hangaard Hansen, Xile Hu, Lucas-Alexandre Stern
Royal Society of Chemistry, 2015
Article

Résumé

We present insights into the mechanism and the active site for hydrogen evolution on nickel phosphide (Ni2P). Ni2P was recently discovered to be a very active non-precious hydrogen evolution catalyst. Current literature attributes the activity of Ni2P to a particular site on the (0001) facet. In the present study, using Density Functional Theory (DFT) calculations, we show that several widely available low index crystal facets on Ni2P have better properties for a high catalytic activity. DFT calculations were used to identify moderately bonding nickel bridge sites and nickel hollow sites for hydrogen adsorption and to calculate barriers for the Tafel pathway. The investigated surfaces in this study were the (10 (1) over bar0), ((1) over bar(1) over bar 20), (11 (2) over bar0), (11 (2) over bar1) and (0001) facets of the hexagonal Ni2P crystal. In addition to the DFT results, we present experiments on Ni2P nanowires growing along the < 0001 > direction, which are shown as efficient hydrogen evolution catalysts. The experimental results add these nanowires to a variety of different morphologies of Ni2P, which are all active for HER.

Official source

https://infoscience.epfl.ch/record/208675?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Computational Modeling of the Oxygen Evolution Reaction at Semiconductor-Water Interfaces: A Path Towards Breaking Linear Scaling Relationships

Patrick Gono

Photoelectrochemical water splitting is a promising source of clean, renewable fuel in the form of hydrogen. Despite extensive research endeavors, the widespread adoption of this technology is impeded due to suboptimal catalysts for the oxygen evolution reaction (OER) taking place on the anode. Studies have shown that linear scaling relationships exist between the binding energies of the OER intermediates. These relationships are responsible for the emergence of an overpotential which limits the catalytic efficiency of electrochemical cells. This work is devoted to the study of the OER, the emergence of linear scaling relationships, and possible avenues for overcoming them. We employ a selection of ab-initio computational free energy methods based on density functional theory in order to investigate the OER at atomistic model semiconductor interfaces. An approach based on thermodynamic integration and \textit{ab-initio} molecular dynamics simulations is used to isolate the effect of the solvent on the OER free energy steps. The observed effect is twofold. First, the presence of explicit water affects the equilibrium configurations of the reaction intermediates. Second, explicit water modifies the OER free energy steps by up to 0.5 eV. This effect is rationalized in terms of electrostatic interactions at the interface. Next, we verify the existence of the linear scaling relationships across a set of semiconductor and metal interfaces. We establish the robustness of the scaling relationships with respect to the adopted energy functional. Two potential approaches of breaking the linear scaling are considered. First, a bifunctional mechanism that involves two close but functionally different active sites is investigated. The performance of the proposed mechanism is studied on a set of model interfaces, and the results indicate that specific combinations of catalysts may overcome the limitations imposed by the linear scaling relationship. We were able to establish general trends governing the efficiency of the bifunctional mechanism. In particular, a correlation between the valence band maximum and the hydrogen binding energy may be used as a descriptor in future searches for suitable hydrogen acceptors within the bifunctional scheme. Next, a detailed study of NiOOH/FeOOH catalysts identifies features most favorable to the bifunctional mechanism. Overpotentials as low as 0.13 eV are found for specific configurations. These results support the bifunctional mechanism as a means to break the linear scaling relationships. Second, hole polarons at the TiO

_2

surface induced by electronegative adsorbates in the OER intermediates are studied. The computational hydrogen electrode method in conjunction with a hybrid density functional is employed to quantify the effect of the surface polarons on the OER free energy steps. We find that the hole bipolarons reduce the overpotential of the reaction-determining step leading to good agreement with experiment. The stability of the polarons is further confirmed at the hydrated surface through a free energy study involving the explicit treatment of the solvent. Finally, the polaron energy level is aligned with respect to the redox levels in water to better understand the role of the polarons in the OER. Since the occurrence of surface hole polarons is unrelated to the scaling relationships, it offers an additional handle in the search for improved catalysts.

EPFL2020

Chargement

Renewable energy supply and energy storage in a closed materials cycle are the urgent global challenges of the 21st century. Carbon dioxide (CO2) hydrogenation over catalysts is a method to produce synthetic fuels from renewable energy in a CO2 neutral cycle. Numerous catalysts from pristine to novel materials have been investigated to achieve high CO2 conversion and selective hydrocarbon. Ahead of developing innovatively active catalyst with a high selectivity, it is crucial to understand the active sites and the related reaction mechanisms. Despite the fact that CO2 + H2 is a rather simple chemical equation, many reaction paths on a solid catalyst are possible. However, the proposed mechanisms from literatures have been controversial due to two main difficulties in 1) evidently identifying the reaction species, especially some vital transient species on the pathway of carbon hydrogenation and C-C coupling, and 2) proving the relation between surface structure of the catalysts and the reactivities. To address these difficulties, we built a new instrumental setup and developed an analysis program in order to investigate the catalyst surface and analyze the reaction mechanism in operando. We built up a diffuse reflectance infrared Fourier transform spectroscopy-mass spectroscopy-gas chromatography (DRIFTS-MS-GC) instrument for an operando study of the surface, gas, and liquid products using DRIFTS, MS, GC, and ex situ NMR. A bilevel evolutionary Gaussi-an fitting (BEGF) program was developed for dataset treatment including peak deconvolution and kinetic plot. Standard chemicals like carbonates, bicarbonates, formic acid, acetic acid, methanol, and ethanol, and isotopic spectra using 13CO2 and D2 in the reactions were em-ployed for supporting peak assignments. Based on these infrastructures, CO2 adsorption and hydrogenation reactions on pristine metals (Fe, Co, Ni, and Cu), metal hydride alloy (La-Ni4Cu), and metal-oxide (Co-CoO) were studied. We found out pure Fe, Co, Ni, Cu and La-Ni4Cu metals are not efficient for CO2 hydrogenation, and have no detectable adsorption spe-cies on the surface. High conversion (> 90%) of CO2 on Co-CoO surface emphasized the im-portance of oxide for CO2 chemisorption and for the observations of the surface species. The following investigation on oxide supported metal catalyst Ru/Al2O3 via an in situ control of the individual formation and hydrogenation of each adsorption species demonstrates that the oxide assists CO2 initial activation. CO2 methanation starts at the interface of the metal and the oxide and passes through the steps of CO2 ï® HCO3-* (and/or HCOO-* in CO2+H2 co-adsorption condition) ï® CO* ï® CH4. We further explored the relationship between met-al/(metal+oxide) ratio and their reactivities. We synthesized Co/(Co+CoO) catalysts in the DRIFTS-MS-GC instrument, and investigated the CO2 hydrogenation reaction on site. The results reveal that high concentration of the oxide in the catalyst boosts CO2 methanation, be-cause the CO2 binding is moderate and the adsorption is enhanced when the oxide concentra-tion increased. In short, we established equipment for an operando study of CO2 hydrogenation on catalyst surfaces, unraveled the surface reaction mechanisms and the active sites, developed a highly active catalyst, as well as initiated an efficient data analysis program.

EPFL2020

Chargement

, , , , ,

Catalytic reduction of CO2 to valuable products is an attractive route for CO2 recycling. CeO2-supported Cu catalysts have shown high activity and selectivity for the hydrogenation of CO2 to CO. To uncover the origin of their high performance, we prepared a practical and well-defined model of Cu/CeO2–x catalysts with Cu nanoparticles dispersed on a CeO2–x support. We studied the structure and catalytic activity of the practical catalyst and the evolution of the active phase and surface intermediates using near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) over the model catalyst under CO2 hydrogenation conditions. For both model and practical catalysts, metallic copper and partially reduced ceria with oxygen vacancies were found to be active sites for the reduction of CO2 to CO. Over the model catalyst, partial covering of Cu by CeO2–x and diffusion of Cu into CeO2–x was observed, suggesting that a strong interaction between Cu and CeO2–x was favored during CO2 hydrogenation. The surface analysis results indicated that the CO2 hydrogenation proceeded through the following steps: activation of CO2 in the form of carbonate on the surface of CeO2–x, hydrogenation of carbonate to formate on the surface of Cu by the dissociated H2, and conversion of formate to CO. This work provides direct experimental evidence on the surface properties of Cu and ceria during the RWGS reaction and the activation and hydrogenation processes of CO2 over the Cu/CeO2–x surface for a high RWGS catalytic performance.

ACS2021

Chargement

Computational Modeling of the Oxygen Evolution Reaction at Semiconductor-Water Interfaces: A Path Towards Breaking Linear Scaling Relationships

Patrick Gono

_2

EPFL2020