A TEM study of Ni interfaces formed during activation of SOFC anodes in H-2: Influence of grain boundary symmetry and segregation of impurities
Publications associées (50)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The structure and energetics of the hexagonal reconstruction of Ir(100) have been determined with first principles density functional theory calculations based on the local-density approximation with the generalised-gradient correction. The results reprodu ...
Electron Beam Induced Deposition (EBID) allows deposition of three-dimensional micro- and nano-structures of conductive and insulating materials on a wide range of substrates. The process is based on the decomposition of molecules of a pre-selected precurs ...
The results of the first experiments with test samples, tool steel and polycrystalline Sn carried out with the scanning photoemission microscope built on the ELETTRA storage ring in Trieste are presented and discussed. The scanning photoemission microscope ...
Sand erosion tests were performed on WC-Co and WC-CoCr coatings deposited by the high velocity oxy-fuel spraying method. Several analytical techniques, including X-ray diffraction, Auger electron spectroscopy and energy-dispersive spectroscopy in a transmi ...
Abstract: A short overview of recent work on electroceramic materials relevant to methane-fueled SOFC systems is given. Various fuel feed options are considered, such as pure methane, biogas, and the addition of reforming agents. The principle and implemen ...
Fuel Cells are electrochemical devices that are able to directly convert chemical energy to electrical energy, without any Carnot limitation. Hence, their energy efficiencies are relatively high. Among the various types of fuel cells, solid oxide fuel cell ...
Strontium lanthanum manganite (LSM) and lanthanum ferrite (LSF) perovskite cathode and oxygen membrane materials were synthesized using different techniques: spray pyrolysis, a modified citrate route, oxalate and carbonate co-precipitations. The use of Ca, ...
The polarity of GaN epilayers grown by molecular beam epitaxy is controlled using Mg. This is achieved by simultaneously exposing the surface to Mg and NH3 fluxes during growth interruption. Reflection high-energy electron diffraction (RHEED) indicates the ...
A consortium was created to investigate electroceramic materials that show ionic or mixed ionic-electronic conduction (MIEC), for application as oxygen separation membranes and in solid oxide fuel cells (SOFC, electrolytes and cathodes). The focus is on de ...
Polycrytalline structures are modeled via dynamically envolving power i.e. Laguerre diagrams in the three dimensional flat torus. Generating sites follow motion equations resulting from total (interface) enregy minimization., this results in an evolution o ...