Effect of Surface Charge on Surface-Initiated Atom Transfer Radical Polymerization from Cellulose Nanocrystals in Aqueous Media

Cellulose nanocrystals (CNCs) with different charge densities were utilized to examine the role of electrostatic interactions on surface-initiated atom transfer radical polymerization (SI-ATRP) in aqueous media. To this end, growth of hydrophilic uncharged poly(N,N-dimethylacrylamide) (PDMAM) brushes was monitored by electrophoresis, H-1 NMR spectroscopy, and dynamic light scattering (DLS). Molecular weight and polydispersity of PDMAM brushes was determined by GPC analysis of hydrolytically cleaved polymers. Initiator and polymer brush grafting densities, and thus, initiator efficiencies were derived from elemental analysis. Higher initiator efficiency of polymer brush growth was observed for CNCs with higher anionic surface sulfate half-ester group density, but at the expense of high polydispersity caused by inefficient deactivation. PDMAM grafts with number-average molecular weights up to 530 kDa and polydispersity indices

Design of amphiphilic nanocapsules based on hyperbranched star-block copolymers for the encapsulation and the controlled release of olfactory compounds

Céline Ternat

Effective encapsulation of small, volatile, weakly water-soluble molecules such as flavors and fragrances is necessary to protect them from degradation, to increase their lifetime, and to improve their water dispersion and fixation depending on the substrate of interest. The aim of this project has been to improve encapsulation and release in order to optimize the performance of fragrance molecules in water-based household (detergents, softeners, etc.) and body care applications (shampoos, lotions, etc.), and fine perfumery applications. More specifically, the aim has been to investigate the effectiveness of "unimolecular micelles" based on amphiphilic multi-arm star-block copolymers with a hyperbranched core with more than 26 functional groups, a hydrophobic inner and a hydrophilic outer shell. These have been prepared from a commercial hyperbranched polyester macroinitiator (HBP) by ring-opening polymerization of ε-caprolactone, followed by the atom transfer radical polymerization (ATRP) of tert-butyl acrylate (tBuA). Hydrolysis of the tert-butyl groups has then been used to convert the poly(tBuA) blocks to poly(acrylic acid) (PAA), resulting in HBP-(PCL)p-(PAA)q pH-dependent amphiphilic star-block copolymers with good control of the molecular weight distribution. These were shown to form stable nanocapsules with a well defined core-shell architecture, as confirmed by thermal and microstructural characterization. The necessity of the core-shell architecture for the effective encapsulation of fragrance molecules in aqueous dispersion has been demonstrated by NMR (nuclear magnetic resonance). The extent of encapsulation reflects the dynamic equilibrium between the free molecules and the fragrance/polymer complex and is dependent on the octanol/water partition coefficient (logP) of the fragrance compounds, as demonstrated with a similar non ionic core-shell architecture HBP-(PBMA)37-(PPEGMA)39 composed of a hydrophobic poly(butyl methacrylate) (PBMA) core and a hydrophilic poly(polyethylene glycol) methyl ether methacrylate (PPEGMA) shell (provided by the Polymer Laboratory of the EPFL). The fragrance loadings in the polymer (HBP-(PCL)p-(PAA)q and HBP-(PBMA)37-(PPEGMA)39), which reached up to 30 wt% depending on the type of the fragrance molecule, were argued to be linked to their solubility in the hydrophobic core of the star-block copolymer. Moreover, under conditions representative of real applications (fine perfumery and softener applications) the star-block copolymers significantly extended the time over which the concentration of certain volatiles remained above the human olfactory threshold. Effective encapsulation and delayed release of small hydrophobic molecules was hence demonstrated to be possible with the present systems. The straightforward synthesis, tailorable chemistry and globular architecture of the star-block copolymers investigated here therefore offer promise for the development of relatively cheap encapsulants with affinities for specific components in fragrance packages, and release triggered by selected substrates according to their surface chemistry.

EPFL2007

Polymer Brush Gradients Grafted from Plasma-Polymerized Surfaces

Tugba Bilgiç Tune, Harm-Anton Klok

A new method for generating a surface density gradient of polymer chains is presented. A substrate-independent polymer deposition technique was used to coat materials with a chemical gradient based on plasma copolymerization of 1,7-octadiene and allylamine. This provided a uniform chemical gradient to which initiators for atom transfer radical polymerization (ATRP) were immobilized. After surface-initiated atom transfer radical polymerization (SI-ATRP), poly(2-hydroxyethyl methacrylate) (PHEMA) chains were grafted from the surface and the measured thickness profiles provided direct evidence for how surface crowding provides an entropic driving force resulting in chain extension away from the surface. Film thicknesses were found to increase with the position along the gradient surface, reflecting the gradual transition from collapsed to more extended surface-tethered polymer chains as the grafting density increased. The method described is novel in that the approach provides covalent linkages from the polymer coating to the substrate and is not limited to a particular surface chemistry of the starting material.

Amer Chemical Soc2014

Interaction of polyelectrolytes with oppositely charged surfaces

Vesela Malinova

Despite progress during the last decade, the behavior of charged macromolecules, polyelectrolytes, including their interactions is not yet completely understood. In particular, interactions with oppositely charged surfaces, which play a significant role in many practical applications and are of central importance in life processes, need more investigation. This situation has motivated the selection of the topic of this doctoral thesis. The study is dedicated to interactions of positively charged polyelectrolytes with negatively charged surfaces considering two types of surfaces, flat amphiphile monolayers and porous surfaces of microspheres. The research aimed at quantitative evaluation of the influence of macromolecular dimensions, chemical structure, electrostatic parameters, and surface characteristics on the adsorption process. As a prerequisite, a series of poly(vinylbenzyltrialkylammonium chloride) model polyelectrolytes has been synthesized. The characteristics were five defined contour lengths with three different types of substituents at the quaternary ammonium group each in addition to uniform charge density and narrow chain length distribution. The final polyelectrolytes were the quaternization products of precursors synthesized by controlled radical polymerization. Two experimental techniques were employed to quantify the influence of chemical, macromolecular, and electrostatic parameters as well as geometrical characteristics on the adsorption of polyelectrolytes on porous microsphere surfaces. These were adsorption on microspheres suspended in aqueous phase and microspheres packed in a chromatography column. During the first technique the total surface comes immediately in contact with the polyelectrolyte molecules, whereas the second technique followed the rules of chromatography. For the first time, the contour length of the polyelectrolyte, the Debye length, the pore dimensions, as well as the chemical structure were likewise considered in a comprehensive study to describe the interaction of polyelectrolytes with well-characterized porous surfaces. A polyelectrolyte charge to surface charge ratio was defined and served to classify different adsorption behavior. Three models have been proposed to illustrate the adsorption behavior based on experimental findings and model calculations. The first one identifies the Debye length in addition to the contour length as dominating parameter, which decides whether a polyelectrolyte molecule can enter a pore or not. The second quantifies the influence of the contour length. Finally, the third describes the concentration influence on the type of molecule organization, layer formation, on the outer surface or inside of pores with diameters exceeding considerably the contour length. For amphiphile monolayer, for the first time, the influence of chain length and substituent at the quaternary ammonium group on the adsorption process was quantified. Based on the surface pressure, pressure-area and pressure-time isotherms measured, a model describing the monolayer arrangement on polyelectrolyte solutions was proposed. A second model correlates the increase of the area per amphiphile molecule and the decrease of the surface pressure with the size and hydrophobicity of the substituents. In addition chain length influence was evident. The results of the thesis contribute to progress in basic research in the field of polyelectrolytes, while also an impact on technical applications such as surface modification, chromatographic processes or improvement of materials is expected. Precise data for comparison with theoretical model calculations are provided, which were not available before.