From randomly self-textured substrates to highly efficient thin film solar cells: Influence of geometric interface engineering on light trapping, plasmonic losses and charge extraction

Christophe Ballif, Franz-Josef Haug, Etienne Antoine Julien Moulin
Elsevier, 2017
Article

Résumé

An approach that models the fabrication and enables the characterization of randomly self-textured silicon thin film solar cells is developed and are compared to experimental results. The optical and electrical properties of the solar cells depend on the morphology of the randomly self-textured substrate and the formation of the individual layers of the solar cell. The influence of the interface morphology on the optical and electrical properties is investigated by 3D morphological algorithms. The calculated interface morphologies are compared to measured surfaces, and used as input parameters to simulate the optical wave propagation and to determine the formation of regions with reduced order (cracks) in the solar cells. The calculations are compared to experimentally realized 1.1 mu m thick microcrystalline silicon solar cells prepared on randomly self-textured substrates with high energy conversion efficiency of up to 9.4%. Guidelines for the optical and electronic optimization are provided.

Official source

https://infoscience.epfl.ch/record/224867?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Dye-sensitized solar cells (DSCs) constitute a novel class of hybrid organic-inorganic solar cells. At the heart of the device is a mesoporous film of titanium dioxide (TiO2) nanoparticles, which are coated with a monolayer of dye sensitive to the visible region of the solar spectrum. The role of the dye is similar to the role of chlorophyll in plants; it harvests solar light and transfers the energy via electron transfer to a suitable material (here TiO2) to produce electricity — as opposed to chemical energy in plants. DSCs are fabricated of abundant and cheap materials using inexpensive processes (e.g. screen-printing) and are likely to be a significant contributor to the future commercial photovoltaic technology portfolio. The work conducted during this thesis aimed at optimizing the DSC using three different strategies: The use of versatile organic sensitizers for stable and efficient DSCs, the study of tandem device architectures in combination with other solar cells to harvest a larger fraction of the solar spectrum, and the development of a validated optoelectric model of the DSC. Organic donor-π-acceptor dyes are an interesting alternative to the standard metal-organic complexes used in DSCs. Efficient photovoltaic conversion and stable performance could be demonstrated with three classes of donor systems, namely diphenylamine, difluorenylaminophenyl, and π-extended tetrathiafulvalene. The highest conversion efficiencies were obtained with a difluorenylaminophenyl donor system (η = 8.3 % with a volatile electrolyte and η = 7.6 % with a solvent-free ionic liquid, which was a new record for organic dyes at the time of publication). Surprisingly, efficient regeneration of the oxidized dye by the I-/I3- redox mediator was found with the π-extended tetrathiafulvalene system, even though the thermodynamic driving force was as low as 150 mV. So far driving forces of 300-500 mV had been regarded as necessary for efficient regeneration of the dye cation. Also, important structure-property relationships pertaining to the recombination of electrons with the electrolyte and to the stability of the device could be identified (i.e. effect of linear vs. branched structure, linker length, and moieties used). The power conversion efficiency of solar cells can be extended beyond the limit for a single cell (∼ 30 %) by using multiple cells with different optical gaps in a tandem device. DSCs and chalcopyrite Cu(In,Ga)Se2 (CIGS) solar cells have complementary optical gaps and are thus suitable systems for integration in a tandem device. It was shown that a monolithic DSC/CIGS tandem device has the potential for increased efficiency over a mechanically stacked device due to increased light transmission to the bottom cell, and a monolithic DSC/CIGS device with an initial efficiency of η = 12.2 % was demonstrated. The degradation of the devices — induced by the corrosion of the CIGS cell in contact with the I-/I3- redox mediator — could be retarded with a protective thin conformal ZnO/TiO2 oxide layer coated on the CIGS cell by atomic layer deposition. Finally, an experimentally validated optical and electrical model of the DSC has been developed to assist the optimization process, which is predominantly conducted by empirical means in the DSC research community. The optical model allows to accurately calculate the internal quantum efficiency of devices, i.e. the ratio of extracted electrons to absorbed photons by the dye, a crucial and so far difficult to determine characteristic. Intrinsic parameters — like injection efficiency, electron diffusion length, or distribution of trap states in the TiO2 — can be extracted from experimental steady-state and time-dependent data with the electric model. The model allows to make a comprehensive and quantitative loss analysis of the different optical and electric loss channels in the DSC. The model has been implemented with a graphical user interface for straightforward usage. All three optimization strategies — organic dyes, tandem architecture, and device modeling — developed during this thesis make a valuable contribution to the development and commercialization of inexpensive and high efficiency DSCs. They enable a comprehensive view of the system and pave the way for a systematic analysis and reduction of losses, which has been the ultimate route to success for several established photovoltaic technologies.

EPFL2010

Chargement

L'oxyde de zinc par dépôt chimique en phase vapeur comme contact électrique transparent et diffuseur de lumière pour les cellules solaires

Sylvie Faÿ

Zinc oxide (ZnO) is a material that belongs to the family of Transparent Conductives Oxides (TCO). Its non-toxicity and the abundant availability in the Earth's crust of its components make it an ideal candidate as electrical transparent contact for thin-film amorphous and/or microcrystalline silicon solar cells. The Low-Pressure Chemical Vapour Deposition (LP-CVD) method allows one to obtain rough ZnO layers, which can effectively scatter the light that passes through them. This high scattering capacity increases the path of the light within the solar cell and therefore enhances its probability to be absorbed by the solar cell, and consequently the photogenerated current. This thesis work studies in detail the LP-CVD technology used for deposition of ZnO layers, which are employed as TCO layers for amorphous, microcrystalline and "micromorph" (microcrystalline/amorphous tandem) solar cells developped at the Institute of Microtechnology of the University of Neuchâtel. The chapter 3 is a detailed study of the growth of ZnO layers on a glass substrate. This study reveals a columnar microstructure of the ZnO layers, which are composed of large conical monocrystals. The tops of these monocrystals emerge at the surface of the ZnO layers as pyramids, which give to such layers their rough aspect and therefore their capacity of scattering the light. The two following chapters represent a study of the effect of variations in deposition parameters on the optical properties (transparency and scattering power), electrical properties (conductivity), and structural properties of ZnO layers. The deposition parameters varied thereby are the various gas flows, the substrate temperature, and the process pressure. In particular, a strong influence of the substrate temperature on the microstructure of the ZnO layers is observed. A variation of ten degrees of this deposition temperature leads to abrupt variations of the optical and electrical properties of the layers. From these various studies, a strong correlation is established, between the scattering power, the electrical properties, and the microstructure of the ZnO layers deposited by LP-CVD: The higher the pyramidal grains at the surface of the layers, the higher the scattering capacity of these layers. The larger the monocrystals within the bulk of the layers, the higher the mobility of the free electrons. This enhanced mobility leads to an increase of the conductivity of the layers. Finally, the chapter 6 of this thesis work describes the various situations where LP-CVD ZnO layers are used as transparent electrical contacts and light scattering layers in thin-film silicon solar cells. It is schown that, by incorporating ZnO layers developped in this work in the photovoltaic devices, an increase of 8% in the photogenerated current is obtained, compared to the performances of solar cells using standard commercially available TCO.

EPFL2003

Chargement

Molecular dynamics simulations of nucleation and phase transition in halide perovskites

Paramvir Ahlawat

Perovskite solar cells have emerged as the most promising cheaper photovoltaic technology. Besides solar cells, halide perovskites have a wide range of applications due to their remarkable optoelectronic properties. Starting from 3.8% in 2009, solar to the power conversion efficiency of perovskite solar cells is now >25%, exceeding market leader polycrystalline silicon. These advancements are mainly due to the improvement in their manufacturing process targeted to make better morphology. To this objective, tens of thousands of experimental studies are conducted where a wide range of additives, compositions, and processing conditions are optimized based on a trial and error methodology. Although this approach increased the efficiency, however, perovskite electronics suffer from the problem of stability and reproducibility. Therefore, to industrialize highly efficient perovskite electronics, one needs to understand better and rationalize their fabrication process, i.e., crystallization of halide perovskites. In this thesis, I perform molecular simulations to understand the formation process of halide perovskites. First, I try to lay out the atomic details of the nucleation process of perovskite from the solution. I find that nucleation proceeds in a two-step manner where an intermediate phase forms before the emergence of perovskite crystals from the solution. I observe that monovalent cations can play an essential role in the nucleation process. On this information, simulation-driven experiments are performed by experimental collaborators to demonstrate that the grain size and crystallinity can be tuned by only varying the concentration of monovalent cations in solution. I also attempted to study the effects of different solvents and pseudo-halide additives used to make high-efficiency solar cells. I calculated that by modulating the solute-solvent interactions, one could minimize raw material losses during the coating process. In comparison, pseudo-halide additives are found to passivate the ionic defects and may slow down the growth process that helps to improve the final morphology. Second, I study the solid-solid phase transition in the popular two-step process. I discover a new path to the low-temperature formation of highly efficient metastable cubic phase of formamidinium lead iodide perovskite. I first validate my simulations with in-situ experiments performed by experimental collaborators. Then simulations are employed to design a practical methodology to successfully make thin films of phase pure cubic formamidinium lead iodide at lower temperatures. Moreover, I study the intrinsic stability of this material. I calculate the energy barrier between the metastable photo-active phase and its photo-inactive thermodynamically stable hexagonal phase. I find that once formed; the photo-active phase might be kinetically stable. Additionally, I identify new polymorphs (perovskitoids) of halide perovskites and also study the structural insights of low-dimensional halide perovskites. Overall, I present a fundamental understanding of the crystallization of perovskites which is helpful to design better experiments to make high efficiency and stable perovskite electronics.

EPFL2022

Chargement

L'oxyde de zinc par dépôt chimique en phase vapeur comme contact électrique transparent et diffuseur de lumière pour les cellules solaires

Sylvie Faÿ

EPFL2003

EPFL2010

Molecular dynamics simulations of nucleation and phase transition in halide perovskites

Paramvir Ahlawat

EPFL2022