Experimental Behavior of Concrete-Filled Steel Tube Columns Using Ultrahigh-Strength Steel
Publications associées (134)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Glass used in buildings is often exposed to sources of surface damage which can have a significant effect on its strength. Existing research suggests that the flaws in glass can successfully be repaired by transparent polymeric resins, but the reasons for ...
From their discovery, CNTs have increasingly attracted interest because of their peculiar electrical, mechanical, and chemical properties. In 1991, Sumio Iijima first observed and described in detail the atomic arrangement of this new type of carbon struct ...
Despite the fact that displacement-based methods are now frequently applied when assessing the seismic performance of unreinforced masonry (URM) structures, the displacement capacity of in-plane loaded URM piers is still estimated from empirical rather tha ...
The current paper focuses on the determination of reliable numerical models of earth block masonry wallettes under different loading conditions. Uniaxial compression and diagonal compression tests were performed. Experimental behaviour was modelled with a ...
The automatic generation of elastic-plastic stress fields (EPSF) for structural concrete members by means of the finite element method has been demonstrated as a suitable approach for the design and assessment of D regions. This methodology allows accounti ...
Heavily cold-drawing was performed on a pearlitic steel wire and on an ultra-low carbon (ULC) steel wire in order to highlight and quantify the microstructural changes caused by this type of deformation. Both global techniques (thermoelectric power, electr ...
In cognition, audition and somatosensation, performance correlates strongly between different tasks suggesting the existence of common factors. Surprisingly, this does not hold true for vision. For example, Vernier acuity and Gabor detection correlate very ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
In unreinforced masonry (URM) structures vertical walls are connected by horizontal spandrel elements. Spandrels have been subjected to extensive damage during earthquakes and are often the first elements within a URM building to crack or fail. If URM buil ...
The larger structures are, the lower their mechanical strength. Already discussed by Leonardo da Vinci and Edme Mariotte several centuries ago, size effects on strength remain of crucial importance in modern engineering for the elaboration of safety regula ...