Experimental Behavior of Concrete-Filled Steel Tube Columns Using Ultrahigh-Strength Steel
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The automatic generation of elastic-plastic stress fields (EPSF) for structural concrete members by means of the finite element method has been demonstrated as a suitable approach for the design and assessment of D regions. This methodology allows accounti ...
Glass used in buildings is often exposed to sources of surface damage which can have a significant effect on its strength. Existing research suggests that the flaws in glass can successfully be repaired by transparent polymeric resins, but the reasons for ...
Heavily cold-drawing was performed on a pearlitic steel wire and on an ultra-low carbon (ULC) steel wire in order to highlight and quantify the microstructural changes caused by this type of deformation. Both global techniques (thermoelectric power, electr ...
The current paper focuses on the determination of reliable numerical models of earth block masonry wallettes under different loading conditions. Uniaxial compression and diagonal compression tests were performed. Experimental behaviour was modelled with a ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
The larger structures are, the lower their mechanical strength. Already discussed by Leonardo da Vinci and Edme Mariotte several centuries ago, size effects on strength remain of crucial importance in modern engineering for the elaboration of safety regula ...
In unreinforced masonry (URM) structures vertical walls are connected by horizontal spandrel elements. Spandrels have been subjected to extensive damage during earthquakes and are often the first elements within a URM building to crack or fail. If URM buil ...
In cognition, audition and somatosensation, performance correlates strongly between different tasks suggesting the existence of common factors. Surprisingly, this does not hold true for vision. For example, Vernier acuity and Gabor detection correlate very ...
From their discovery, CNTs have increasingly attracted interest because of their peculiar electrical, mechanical, and chemical properties. In 1991, Sumio Iijima first observed and described in detail the atomic arrangement of this new type of carbon struct ...
Despite the fact that displacement-based methods are now frequently applied when assessing the seismic performance of unreinforced masonry (URM) structures, the displacement capacity of in-plane loaded URM piers is still estimated from empirical rather tha ...