Assembling system between columns and a slab and construction process therefore

A concrete slab assembling system comprising: -a reinforced concrete slab (1); -a supporting column (2); -a supported column (3), having a bottom-end with a reference outer diameter thereof; -an interface adaptor (10) for placement between the supported column bottom-end and the slab top surface; -said interface adaptor (10) outer diameter at least at the contacting portion with said bottom-end surface, being at least 10% smaller than the reference diameter of the supported column. The invention also provides the corresponding method for assembling a concrete slab (1) between a supporting column (2) and a supported column (3).

Post-punching behavior of reinforced concrete slabs

Yaser Mirzaei

Reinforced concrete flat slabs are extensively used in buildings and parking garages. Their design is governed by deflection at the serviceability limit state and punching shear at the ultimate limit state. When no punching shear reinforcement is provided, failure develops in a brittle manner. Punching shear failure occurs with almost no warning signs, because deflections are small and cracks at the top side of the slab are usually not visible. Over the past decades, several structural collapses occurred due to punching shear failure resulting in human casualties and large damages. These collapses revealed some shortcomings in codes of practice and the necessity of reconsidering punching provisions. The investigations of these collapses showed that the collapse initiated from a local punching failure and propagated throughout the structure, in a progressive collapse. The term progressive collapse refers to the spreading of an initial local failure triggered by the loss of one or more load carrying members and leading to partial or total collapse of the structure in a manner analogous to the chain reaction. As a local punching failure can trigger progressive collapse, the study of the post-punching behavior can help adopting constructive solutions to avoid progressive collapse. The post-punching behavior of flat slabs supported by columns has not yet been thoroughly investigated. Therefore, an extensive experimental campaign was performed in the framework of this dissertation to investigate the post-punching behavior of 24 slabs with various reinforcement layouts. The effects of bending reinforcement, integrity reinforcement, bent-up bars, steel type, and anchorage conditions on the post-punching behavior of slab-column connections were investigated. The performance and robustness of the various solutions was investigated to obtain physical explanations of the load-carrying mechanisms. Test results showed that the post-punching strength provided by the top reinforcement is small because the concrete cover is thin and spalling of the concrete cover occurs leaving the reinforcement ineffective. In addition, it was observed that integrity reinforcing bars passing through the column significantly improve the post-punching behavior in terms of strength and deformation capacity. The integrity bars behave as a tensile membrane inclined to the plane of the slab and are able to sustain damaged portions from the column. Thus, one possibility to enhance the robustness of the structure against progressive collapse is to provide well-anchored bottom reinforcing bars passing through the column. A mechanical model capable of predicting the post-punching behavior of slab-column connections without shear reinforcement was developed. The model predicts the contribution of the tensile reinforcement and of the integrity reinforcement to the post-punching strength. The model accounts for possible failure modes including the fracture of the bars and the destruction of the concrete over the integrity bars. The progressive destruction of the concrete within and outside the punching cone is treated by considering the pullout behavior of reinforcement embedded in the concrete. Finally, a parametric study was performed to evaluate the influence of various parameters and their relative importance in order to develop practical proposals for the estimation of the post-punching strength. It showed that the post-punching strength is not only a function of the cross sectional area and yield strength of the integrity reinforcement as it appears in provisions and codes of practices but also of the diameter of the bars, the effective depth, the ductility, and the type of reinforcement.

EPFL2010

Experimental investigation of reinforced concrete slabs with punching shear reinforcement

Stefan Lips, Aurelio Muttoni

Over the past century, the use of flat slabs in buildings and especially in parking garages has been growing as it is an economic and efficient solution. Flat slabs are easy to build and have, through their smaller depth, an economical and architectural advantage compared to slabs on girders. Because of their limited depth, flat slabs are especially sensitive to deflections and to punching shear, which are their main design criteria. Furthermore, flat slabs without punching shear reinforcement have a rather brittle failure mode with little deformation capacity. This behavior potentially limits the redistribution of the internal forces in flat slabs in the case of punching of an isolated column and can thus lead to progressive collapse of the entire structure. To increase both the strength and the deformation capacity of flat slabs, punching shear reinforcement can be provided in the vicinity of the columns. Although the influence of punching shear reinforcement on the strength of flat slabs has been intensively investigated, there are still fundamental uncertainties such as the contribution of the shear reinforcement and the strength of the concrete struts close to the column. The paper presents the results of an extensive experimental campaign performed at the Ecole Polytechnique Fédérale de Lausanne (EPFL). Sixteen full-scale slab specimens (3.0 x 3.0 m in plane) with varying parameters such as the column size, the slab thickness, the shear reinforcement ratio, and the shear reinforcing system have been investigated. The performance of these specimens is analyzed and compared to modern design codes and to the critical shear crack theory.

Proceeding of the 8th fib-PhD Symposium2010

Poinçonnement non symétrique des dalles en béton armé

Luca Tassinari

Punching shear of reinforced concrete flat slabs supported on columns is a failure mode in which the slab fractures around the column. This type of failure is sudden and can be catastrophic in nature. Punching shear generally governs the ultimate limit state design of flat slabs and slab bridges. The Critical Shear Crack Theory (CSCT) developed by Prof. Muttoni can be used to calculate the punching shear strength in axis-symmetrical cases. The main objective of this work was to investigate non-symmetrical cases of punching shear and to extend the CSCT to such cases. The failure criterion proposed by Prof. Muttoni allows estimating the punching shear strength in terms of the slab rotation in the radial direction. A more general model is needed to predict the punching shear strength of slabs with non-symmetrical conditions. A numerical model was developed, which is based on the finite difference method, to predict the flexural behaviour of flat slabs. It takes into account the non-linear behaviour of concrete and reinforcement steel and can be applied to non-symmetrical cases and complex structures such as flat slabs with different span length in each direction and slab bridges. Moreover, this model satisfactorily predicts the behaviour of slabs with orthogonal reinforcement and general load cases. A series of punching shear tests on non-symmetrical slabs was carried out to validate an analytical approach which considers the redistribution of shear stresses along the perimeter. This refined approach provides accurate predictions of strength and slab rotations in both orthogonal directions at failure. Moreover, this approach can be a useful tool for the structural assessment of existing structures. An analytical model is also presented which extends the CSCT to punching shear cases of internal columns with moment transfer, edge columns, and corner columns, which are commonly found in practice. The comparison between the analytical and experimental results shows that the approach developed combined with the failure criterion used in the CSCT provides accurate predictions of strength and deformation capacity for internal columns with moment transfer, edge columns, and corner columns. This work was also used to validate the formulation of the first complete draft of the Model Code 2010. In this work, the punching shear behaviour of flat slabs with bent-up bars was also investigated. Bent-up bars were commonly used in the past and are still used nowadays for particular design situations. A reliable model is needed to design structures and to assess existing structures with bent-up bars. To address this, five punching shear tests were performed on symmetrical slabs with bent-up bars. The strain measurements along the reinforcement bars provided a better understanding of the anchorage mechanisms. A model was developed, which is consistent with the CSCT and provides satisfactory predictions of the distribution of strains along the bent-up bar. The proposed model can be used to calculate the contribution of the bent-up bars, which needs to be added to the concrete contribution from the CSCT to obtain the punching shear strength.