Microstructure and flow stress evolution during hot deformation of 304L austenitic stainless steel in variable thermomechanical conditions
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A 2-D numerical model for brittle creep and stress relaxation is proposed for the time-dependent brittle deformation of heterogeneous brittle rock under uniaxial loading conditions. The model accounts for material heterogeneity through a stochastic local f ...
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
Existing phenomenological constitutive models are unable to capture the full range of behaviors of ceramic composite laminates. To ameliorate this deficiency, we propose a new model based on the deformation theory of plasticity. The predictive capabilities ...
To study the deformation and fracture of sandstone under static-dynamic coupled load, a cylindrical specimen under pre-static axial and confining pressure was dynamically loaded using an improved split Hopkinson pressure bar (SHPB). Through the application ...
Microstructures in serpentine samples recovered from deformation experiments performed at high pressure (1-8 GPa), high temperature (150-500 degrees C), and laboratory strain rates (4 10(-4)-10(-6)s(-1)) were studied using transmission electron microscopy ...
A three-dimensional (3-D) coupled hydromechanical granular model has been developed and validated to directly predict, for the first time, hot tear formation and stress strain behavior in metallic alloys during solidification. This granular model consists ...
Optimizing the electronic structures and carrier dynamics in semiconductors at atomic scale is an essential issue for innovative device applications. Besides the traditional chemical doping and the use of homo/heterostructures, elastic strain has been prop ...
The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy we ...
For environmental reasons, lead has been banned from microelectronic solder materials since the adoption of the RoHS legislation in 2006. A large number of investigations have lead to the development of new lead-free solder materials like the SnAgCu alloy ...
Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel i ...
