Experimental and numerical characterisation of heat flow during flame cutting of thick steel plates
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and ...
Plate heat exchangers are adopted in many domestic and industrial applications, such as ventilation, air conditioning, evaporation or condensation process, heat pumps and cooling of hydrodynamic circuits in engines. In the present thesis, an extensive expe ...
In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...
Pulsating heat pipes (PHPs) represent a promising solution for passive on-chip, two-phase cooling of micro-electronics, providing advantages such as a simple construction and operation in any gravitational orientation. Unfortunately, the unique coupling of ...
A new type of district energy network has recently been proposed that is based on the use of CO2 as a heat transfer fluid. It uses the latent heat of vaporization, instead of sensible heat, to store and transfer heat. Previous studies have focused on demon ...
Nowadays, the production in fine chemical and pharmaceutical industry is mostly carried out in large scale batch reactors having typically dimensions of a few meters to satisfy the demand of the market. Even though this technology has been widely used and ...
Open-pore aluminium foams are of interest in thermal management of power electronics due to their large specific surface area, low weight and relatively high thermal conductivity. The replication process is a low-cost and simple foam manufacturing method t ...
High-temperature superconducting coated conductors (HTS-CCs) are good candidates for resistive superconducting fault current limiter (RSFCL) applications. However, the high current density they can carry and their low thermal diffusivity expose them to the ...
Temperatures measurements during flame cutting of a thick steel plate and measurements of the extension of the fusion and heat affected zones and Vickers hardness after cutting have been performed. Additionally, a 3-D thermal model for simulation of flame- ...
The time-averaged two-phase flow heat transfer coefficients were determined with a very fine resolution based on infra-red (IR) temperature measurements conducted over a 1 cm(2) heated area of a multi-micro-, channel evaporator. This experimental investiga ...
