The mechanics of punching in reinforced concrete slabs and footings without shear reinforcement
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The development and construction of offshore wind farms requires the correct estimation of the friction that can be mobilised at the rock/grout interface. In conventional studies, the shear behaviour of a joint is usually investigated with laboratory tests ...
Traditionally, the concrete strength is measured on cubes or cylinders having normalized dimensions, suitable vibration and curing conditions and their strength is assessed in laboratory under fast loading rates. However, the in-situ strength of structural ...
The behavior of reinforced-concrete structural elements under moving loads involves many complex parameters related to material properties, vehicle loading, environmental changes and structural response. It is difficult to generate the real conditions of l ...
The examination of bridges under service loading is key for understanding their condition and thus for their sustainable and efficient use. The need to extend the service duration of existing bridges is increasing, and therefore, efficient tools for examin ...
The effectiveness of post-tensioning in enhancing the fracture resistance of glass beams depends on the level of compressive pre-stress introduced at the glass edge surface that will in service be exposed to tensile stresses induced by bending. Maximum pre ...
The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...
The objective of this thesis is to develop knowledge and methods to prevent fatigue failure of bridges. The Fatigue Limit State is investigated from both the demand (S) and resistance (R) side.
The S-part focuses on reduction of uncertainties through monit ...
Redistribution of shear forces in reinforced concrete members without shear reinforcement is a key aspect for the assessment of the shear capacity of wide beams and slabs. Such redistributions are due to the nonlinear response of reinforced concrete (both ...
Reinforced concrete planar members, as slabs and shells, are structural elements commonly used in the construction technique, which are typically designed without the arrangement of shear reinforcement. Despite the fact that this solution allows for fast a ...
The bond response of deformed bars in structural concrete is a phenomenon governed, to a large extent, by the rib-to-concrete contact and interaction, with contact forces depending on both material properties and the kinematics between the contact surfaces ...
