Publication

Behaviour of carbon-14 containing low molecular weight organic compounds in contaminated groundwater under aerobic conditions

Aislinn Ann Boylan
2018
Article
Résumé

Short chain carbon-14 (C-14) containing organic compounds can be formed by abiotic oxidation of carbides and impurities within nuclear fuel cladding. During fuel reprocessing and subsequent waste storage there is potential for these organic compounds to enter shallow subsurface environments due to accidental discharges. Currently there is little data on the persistence of these compounds in such environments. Four C-14-labelled compounds (acetate; formate; formaldehyde and methanol) were added to aerobic microcosm experiments that contained glacial outwash sediments and groundwater simulant representative of the Sellafield nuclear reprocessing site, UK. Two concentrations of each electron donor were used, low concentration (10(-5) M) to replicate predicted concentrations from an accidental release and high concentration (10(-2) M) to study the impact of the individual electron donor on the indigenous microbial community in the sediment. In the low concentration system only similar to 5% of initial C-14 remained in solution at the end of experiments in contact with atmosphere (250-350 h). The production of (CO2)-C-14(g) (measured after 48 h) suggests microbially mediated breakdown is the primary removal mechanism for these organic compounds, although methanol loss may have been partially by volatilisation. Highest retention of C-14 by the solid fractions was found in the acetate experiment, with 12% being associated with the inorganic fraction, suggesting modest precipitation as solid carbonate. In the high concentration systems only similar to 5% of initial C-14 remains in solution at the end of the experiments for acetate, formate and methanol. In the formaldehyde experiment only limited loss from solution was observed (76% remained in solution). The microbial populations of unaltered sediment and those in the low concentration experiments were broadly similar, with highly diverse bacterial phyla present. Under high concentrations of the organic compounds the abundance of common operational taxonomic units was reduced by 66% and the community structure was dominated by Proteobacteria (particularly Betaproteobacteria) signifying a shift in community structure in response to the electron donor available. The results of this study suggest that many bacterial phyla that are ubiquitous in near surface soils are able to utilise a range of C-14-containing low molecular weight organic substances very rapidly, and thus such substances are unlikely to persist In aerobic shallow subsurface environments.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Concepts associés (40)
Traitement du combustible nucléaire usé
Le traitement du combustible nucléaire usé (anciennement retraitement des combustibles usés) regroupe plusieurs procédés mécaniques et chimiques de traitement du combustible nucléaire après utilisation en réacteur, visant à séparer des éléments potentiellement réutilisables tels que l'uranium et le plutonium, mais également les « actinides mineurs », des produits de fission contenus dans le combustible nucléaire irradié. Le traitement du combustible usé est l'une des étapes du cycle du combustible nucléaire.
Cycle du combustible nucléaire
thumb|Schéma simplifié d'un cycle du combustible nucléaire : (1) extraction-enrichissement-fabrication (2) retraitement après usage (3) stockage ou (4) recyclage. Le cycle du combustible nucléaire (ou chaîne du combustible nucléaire) est l'ensemble des opérations de fourniture de combustible aux réacteurs nucléaires, puis de gestion du combustible irradié, depuis l'extraction du minerai jusqu'à la gestion des déchets radioactifs.
Combustible nucléaire
vignette|Modèle de l'atome. Le combustible nucléaire est le produit qui, contenant des isotopes fissiles (uranium, plutonium...), fournit l'énergie dans le cœur d'un réacteur nucléaire en entretenant la réaction en chaîne de fission nucléaire. Les termes « combustible » et « combustion » sont utilisés par analogie à la chaleur dégagée par une matière en feu, mais sont inappropriés pour caractériser tant le produit que son action.
Afficher plus
Publications associées (42)

Atomic level insight into irradiation effects in nuclear fuel materials

Shaileyee Bhattacharya

Microstructural evolution during in-pile irradiation, radiation damage effects and fission products behavior in UO2 nuclear fuel are key issues in understanding and for the modeling of the performance as well as safety characteristics of nuclear fuels in t ...
EPFL2024

Extension of the OFFBEAT fuel performance code to finite strains and validation against LOCA experiments

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro, Edoardo Luciano Brunetto

The mechanical analysis of nuclear fuel behavior under base-irradiation conditions has traditionally been performed adopting the small-strain approximation. However, many cases of interest for fuel behavior involve the occurrence of large rod deformations ...
ELSEVIER SCIENCE SA2023

Validation of spent nuclear fuel decay heat calculations using Polaris, ORIGEN and CASMO5

Andreas Pautz, Dimitri Rochman, Stefano Caruso

Decay heat calculations of spent nuclear fuel (SNF) using Polaris and ORIGEN codes in the SCALE code sys-tem, and CASMO5 code, are validated using measurements from the Clab and GE-Morris facilities. Multiple hypothesis testing, relying on permutations and ...
PERGAMON-ELSEVIER SCIENCE LTD2022
Afficher plus
MOOCs associés (1)
Water quality and the biogeochemical engine
Learn about how the quality of water is a direct result of complex bio-geo-chemical interactions, and about how to use these processes to mitigate water quality issues.

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.