Modeling of fatigue behavior based on interaction between time- and cyclic-dependent mechanical properties
Publications associées (39)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The observation of cracks in normally functioning reinforced concrete (RC) structures is expected as the tensile strength of concrete is relatively low. However, one or more of those cracks can start to propagate with increasing crack openings, localizing ...
This paper investigates the fatigue behavior of non-load-carrying transverse welded steel attachments by reporting on an experimental characterization under constant and variable amplitude loading. Fatigue cracks have been monitored using DIC and ACPD tech ...
This paper presents the results of an experimental campaign designed specifically to investigate unexpected and unwanted failures observed during the quasi-static and fatigue tensile loading of structural adhesives. Simple finite element models were also d ...
The objective of this thesis is to develop knowledge and methods to prevent fatigue failure of bridges. The Fatigue Limit State is investigated from both the demand (S) and resistance (R) side.
The S-part focuses on reduction of uncertainties through monit ...
One of the most instrumental aspects governing the response of structural concrete at ultimate limit state refers to the possibility of developing smeared cracking patterns within a member (associated normally to the presence of sufficient reinforcement fo ...
Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...
Strain Hardening Ultra High Performance Fibre Reinforced Concretes (SH-UHPFRC) have a high elastic limit (around 10 MPa) and high tensile strength (up to 20 MPa) and exhibit significant strain hardening (1 to 4 ‰) under tensile loads. Because of these appe ...
The effect of the stress ratio (R = sigma(min)/sigma(max)) on the fatigue behavior of (+/- 45)(2s) angle-ply glass/epoxy composite laminates was investigated by comparing their mechanical, thermal, and optical properties under the stress ratio of 0.5 with ...
Today, it is widely accepted that fatigue is one of the most common failure mechanisms in structural components, and pure static failure is rarely observed. Engineering structures are subjected to complex mechanical fatigue loading histories, which cause d ...
This paper investigates the behaviour of concrete failing under high stress levels and subjected to different types of loading. The aim of this investigation is to clarify the development of linear and nonlinear creep strains and how they relate to materia ...