MATHICSE Technical Report : A numerical investigation of multi space reduced basis preconditioners for parametrized elliptic advection-diffusion

We analyze the numerical performance of a preconditioning technique recently proposed in [4] for the ecient solution of parametrized linear systems arising from the finite element (FE) discretization of parameter-dependent elliptic partial differential equations (PDEs). In order to exploit the parametric dependence of the PDE, the proposed preconditioner takes advantage of the reduced basis (RB) method within the preconditioned iterative solver employed to solve the linear system, and combines a RB solver, playing the role of coarse component, with a traditional fine grid (such as Additive Schwarz or block Jacobi) preconditioner. A sequence of RB spaces is required to handle the approximation of the error-residual equation at each step of the iterative method at hand, whence the name of Multi Space Reduced Basis (MSRB) method. In this paper, a numerical investigation of the proposed technique is carried on in the case of a Richardson iterative method, and then extended to the flexible GMRES method, in order to solve parameterized advection-diffusion problems. Particular attention is payed to the impact of anisotropic diffusion coeffcients and (possibly dominant) transport terms on the proposed preconditioner, by carrying out detailed comparisons with the current state of the art algebraic multigrid preconditioners.

A numerical investigation of multi space reduced basis preconditioners for parametrized elliptic advection-diffusion equations

Niccolò Dal Santo, Simone Deparis, Andrea Manzoni

We analyze the numerical performance of a preconditioning technique recently proposed in [1] for the efficient solution of parametrized linear systems arising from the finite element (FE) discretization of parameter-dependent elliptic partial differential equations (PDEs). In order to exploit the parametric dependence of thePDE, the proposed preconditioner takes advantage of the reduced basis (RB) method within the preconditioned iterative solver employed to solve the linear system, and combines a RB solver, playing the role of coarse component, with a traditional fine grid (such as Additive Schwarz or block Jacobi) preconditioner. A sequence of RB spaces is required to handle the approximation of the error-residual equation at each step of the iterative method at hand, whence the name of Multi Space Reduced Basis (MSRB) method. In this paper, a numerical investigation of the proposed technique is carried on in the case of a Richardson iterative method, and then extended to the flexible GMRES method, in order to solve parameterized advection-diffusion problems. Particular attention is payed to the impact of anisotropic diffusion coefficients and (possibly dominant) transport terms on the proposed preconditioner, by carrying out detailed comparisons with the current state of the art algebraic multigrid preconditioners

Walter de Gruyter GmbH2017

Multi space reduced basis preconditioners for parametrized partial differential equations

Niccolò Dal Santo

The multiquery solution of parametric partial differential equations (PDEs), that is, PDEs depending on a vector of parameters, is computationally challenging and appears in several engineering contexts, such as PDE-constrained optimization, uncertainty quantification or sensitivity analysis. When using the finite element (FE) method as approximation technique, an algebraic system must be solved for each instance of the parameter, leading to a critical bottleneck when we are in a multiquery context, a problem which is even more emphasized when dealing with nonlinear or time dependent PDEs. Several techniques have been proposed to deal with sequences of linear systems, such as truncated Krylov subspace recycling methods, deflated restarting techniques and approximate inverse preconditioners; however, these techniques do not satisfactorily exploit the parameter dependence. More recently, the reduced basis (RB) method, together with other reduced order modeling (ROM) techniques, emerged as an efficient tool to tackle parametrized PDEs. In this thesis, we investigate a novel preconditioning strategy for parametrized systems which arise from the FE discretization of parametrized PDEs. Our preconditioner combines multiplicatively a RB coarse component, which is built upon the RB method, and a nonsingular fine grid preconditioner. The proposed technique hinges upon the construction of a new Multi Space Reduced Basis (MSRB) method, where a RB solver is built at each step of the chosen iterative method and trained to accurately solve the error equation. The resulting preconditioner directly exploits the parameter dependence, since it is tailored to the class of problems at hand, and significantly speeds up the solution of the parametrized linear system. We analyze the proposed preconditioner from a theoretical standpoint, providing assumptions which lead to its well-posedness and efficiency. We apply our strategy to a broad range of problems described by parametrized PDEs: (i) elliptic problems such as advection-diffusion-reaction equations, (ii) evolution problems such as time-dependent advection-diffusion-reaction equations or linear elastodynamics equations (iii) saddle-point problems such as Stokes equations, and, finally, (iv) Navier-Stokes equations. Even though the structure of the preconditioner is similar for all these classes of problems, its fine and coarse components must be accurately chosen in order to provide the best possible results. Several comparisons are made with respect to the current state-of-the-art preconditioning and ROM techniques. Finally, we employ the proposed technique to speed up the solution of problems in the field of cardiovascular modeling.

EPFL2018

Numerical Methods for First and Second Order Fully Nonlinear Partial Differential Equations

Dimitrios Gourzoulidis

This thesis focuses on the numerical analysis of partial differential equations (PDEs) with an emphasis on first and second-order fully nonlinear PDEs. The main goal is the design of numerical methods to solve a variety of equations such as orthogonal maps, the prescribed Jacobian equation and inequality, the elliptic and parabolic Monge-Ampère equations. For orthogonal map we develop an \emph{operator-splitting/finite element} approach for the numerical solution of the Dirichlet problem. This approach is built on the variational principle, the introduction of an associated flow problem, and a time-stepping splitting algorithm. Moreover, we propose an extension of this method with an \emph{anisotropic mesh adaptation algorithm}. This extension allows us to track singularities of the solution's gradient more accurately. Various numerical experiments demonstrate the accuracy and the robustness of the proposed method for both constant and adaptive mesh. For the prescribed Jacobian equation and the three-dimensional Monge-Ampère equation, we consider a \emph{least-squares/relaxation finite element method} for the numerical solution of the Dirichlet problems. We then introduce a relaxation algorithm that splits the least-square problem, which stems from a reformulation of the original equations, into local nonlinear and variational problems. We develop dedicated solvers for the algebraic problems based on Newton method and we solve the differential problems using mixed low-order finite element method. Overall the least squares approach exhibits appropriate convergence orders in

L^2(\Omega)

and

H^1(\Omega)

error norms for various numerical tests. We also design a \emph{second-order time integration method} for the approximation of a parabolic two-dimensional Monge-Ampère equation. The space discretization of this method is based on low-order finite elements, and the time discretization is achieved by the implicit Crank-Nicolson type scheme. We verify the efficiency of the proposed method on time-dependent and stationary problems. The results of numerical experiments show that the method achieves nearly optimal orders for the

L^2(\Omega)

and

H^1(\Omega)

error norms when smooth solutions are approximated. Finally, we present an adaptive mesh refinement algorithm for the elliptic Monge-Ampere equation based on the residual error estimate. The robustness of the proposed algorithm is verified using various test cases and two different solvers which are inspired by the two previous proposed numerical methods.

EPFL2021