Pressure drop and convective heat transfer in porous ceramic structures fabricated by additive manufacturing
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Xu et al. have recently published a set of results for boiling heat transfer measurements in a multi- channel micro- scale evaporator for flow boiling of acetone in triangular cross- section channels ( hydraulic diameter of 155.4 mm). In the present collab ...
In this paper an optimal shape control problem dealing with heat transfer in enclosures is studied. We have considered an enclosure heated by a flame surface (taking into account radiation, conduction and convection effects), and we look for an optimal fla ...
Based on temperature-dependent thermo-physical property models developed previously, a one-dimensional model was proposed to predict the thermal responses of FRP composites in time and space domain, up to high temperatures. An implicit finite differential ...
This article presents experimental results of heat transfer from two different studies [1, 2] for horizontal flow boiling inside smooth copper tubes with different refrigerants. The main goal of this study was to verify the influence of the saturation temp ...
Using pulsed near infrared laser radiation for selective laser sintering bears several advantages compared to cw sintering such as low required average power, less residual heat and improved lateral precision. By adapting the pulse length (and thus the hea ...
Spie-Int Soc Optical Engineering, Po Box 10, Bellingham, Wa 98227-0010 Usa2003
This paper describes experiments performed on JET over the past two years dedicated to characterizing ELM-averaged power exhaust (based on time-averaged divertor power deposition profiles), with an emphasis on unfuelled, Type-I ELMy H-mode. Radial energy t ...
Large-Eddy Simulations (LES) of the turbulent compressible ow within heated curved ducts of square cross section are presented. The aim here is to predict the three- dimensional structures which develop inside cooling channels of rocket engines and study t ...
A unique bench-scale heat flux calorimeter is described, which is capable of detecting the low heat signal of an animal cell culture (a max. of 200 mW/l is produced with a batch culture of SF9 insect cells). After the tech. modifications that enhanced the ...
Different physical problems have been analysed in the preceding {chapters}: they relate to water transfer, to heat transfer, to pollutant transfer and to mechanical equilibrium. All these problems are governed by differential equations and boundary conditi ...
The development of a reactive pultrusion process is presented by considering the advantages of an in situ polymerisation of thermoplastic lauryllactam monomers. The specifics of the reaction injection unit, of the fibre-drying oven and of different pultrus ...
