Chiral Spin-Wave Velocities Induced by All-Garnet Interfacial Dzyaloshinskii-Moriya Interaction in Ultrathin Yttrium Iron Garnet Films

Ping Che, Jilei Chen, Peng Gao, Dirk Grundler, Yuehui Li, Song Liu, Tao Liu, Sa Tu, Haiming Yu, Jianyu Zhang
2020
Article

Résumé

Spin waves can probe the Dzyaloshinskii-Moriya interaction (DMI), which gives rise to topological spin textures, such as skyrmions. However, the DMI has not yet been reported in yttrium iron garnet (YIG) with arguably the lowest damping for spin waves. In this work, we experimentally evidence the interfacial DMI in a 7-nm-thick YIG film by measuring the nonreciprocal spin-wave propagation in terms of frequency, amplitude, and most importantly group velocities using all electrical spin-wave spectroscopy. The velocities of propagating spin waves show chirality among three vectors, i.e., the film normal direction, applied field, and spin-wave wave vector. By measuring the asymmetric group velocities, we extract a DMI constant of 16 μJ/m2, which we independently confirm by Brillouin light scattering. Thickness-dependent measurements reveal that the DMI originates from the oxide interface between the YIG and garnet substrate. The interfacial DMI discovered in the ultrathin YIG films is of key importance for functional chiral magnonics as ultralow spin-wave damping can be achieved.

Official source

https://infoscience.epfl.ch/record/275566?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Optical Gas-Phase Frequency References Based on Photonic Crystal Technology

Isabelle Dicaire

Optical frequency references are devices providing well-defined and stable optical frequency responses to incoming radiation for applications such as high-precision spectroscopy and optical fibre communications. To stabilise the emission frequency of lasers, which drifts with time mostly because of fluctuations in temperature and mechanical vibrations, atomic and molecular optical transitions can be used since they show precise and well-defined frequency responses to incoming radiation. However from a practical standpoint conventional gas cell devices cannot be easily integrated into existing optical systems because of their bulky dimensions. To replace conventional absorption cells, photonic crystal fibres filled with gas-phase material are promising devices owing to their robustness, reliability, and portable characteristics. In addition they can be directly embedded into existing optical systems and they perform well in harsh environments. In this experimental study, optical gas-phase frequency references based on photonic crystal technology are realised. The gas-sensing properties of different photonic crystal fibre samples are studied and the long-term stability and reliability of fibre gas cells are demonstrated. In addition an analytical model predicting the gas-filling time in photonic crystal fibres (PCF) is developed and can be applied to any type of fibre, fibre geometry, or length. Then fibre gas cells filled with acetylene gas, a recognised frequency reference gas-phase material, have been prepared to conduct fundamental research on slow & fast light generation in optical fibres to verify the possibilities of slow light in enhancing light-matter interaction. The group velocity of light is controlled by modifying the material and structural dispersive properties of the PCF absorption cells through stimulated Brillouin scattering and cavity ring resonators, respectively. We could demonstrate that material slow light has no impact on the molecular absorption effect whereas structural slow light has an impact on the absorption efficiency scaling linearly with the group index. Such radically different responses to slow light suggest that group velocity is not the universal physical quantity scaling light-matter interaction, and that the optical absorption of molecules is more closely related to the velocity of the electromagnetic energy. Finally the impact of slow light on the molecular absorption efficiency is also evaluated in dispersion-engineered photonic crystal waveguides. We demonstrate that in planar photonic crystal waveguides the field enhancement and its evanescent fraction have more impact on the absorption efficiency than the reduction of the group velocity of light.

EPFL2012

Chargement

The term "spin caloritronics" defines a novel branch of spintronics that focuses on the interplay between electron spins with heat currents. In the frame of this research area, this thesis is aimed at investigating the effect of a heat current on magnetization dynamics in two different typologies of systems and materials: magnetic insulators and metallic nanostructures. In the first case we conduct studies on yttrium iron garnet (YIG) samples subjected to a temperature gradient. The irreversible thermodynamics of a continuous medium with magnetic dipoles predicts that a thermal gradient across a YIG slab, in the presence of magnetization waves, produces a magnetic field that is the magnetic analog of the well known Seebeck effect. This thermally induced field can influence the time evolution of the magnetization, in such a way that it is possible to modulate the relaxation of the precession when applying a heat current. We found evidence for such a magnetic Seebeck effect (MSE) by conducting transmission measurements in a thin slab of YIG subjected to an in-plane temperature gradient. We showed how the MSE can modulate the magnetic damping depending on the direction of the propagating magnetostatic modes with respect to the orientation of the temperature gradient. In the second part of the thesis we focus our investigation on metallic nanostructures subjected to a heat current. In a metal, the three-current model (current of entropy, of spin up and spin down electrons) predicts that a heat current induces a spin current which will then influence the magnetization dynamics like a charge-driven spin current would. Hence, we explore what has been called Thermal Spin Torque in electrodeposited Co / Cu / Co asymmetric spin valves placed in the middle of copper nanowires. These samples are fabricated by conventional electrodeposition technique in porous polycarbonate membranes using an original method that allows high frequency electrical measurements. We used a modulated laser to investigate the effect of a temperature gradient. We observed a heat-driven spin torque by measuring electrically the quasi-static magnetic response of a spin valve when subjected to the heat current, generated by two laser diodes heating the electrical contact at one end or the other of the nanowire. Analysing the variation in the resistance induced by a heat-driven spin torque, represented by peaks occurring in correspondence with the GMR transition, we found that a temperature difference of the order of 5 K is sufficient to produce sizeable torque in spin valves.

EPFL2015

Chargement

Optical Gas-Phase Frequency References Based on Photonic Crystal Technology

Isabelle Dicaire

EPFL2012

EPFL2015