Thermomechanical behavior of underground energy infrastructures
Publications associées (81)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The Phase-1 upgrade of the LHC to full design luminosity, planned for 2019 at CERN, requires the modernisation of the experiments around the accelerator. The Inner Tracking System (ITS), the innermost detector at the ALICE experiment, will be upgraded by r ...
Plate heat exchangers are adopted in many domestic and industrial applications, such as ventilation, air conditioning, evaporation or condensation process, heat pumps and cooling of hydrodynamic circuits in engines. In the present thesis, an extensive expe ...
In the second article of the present two-part paper, upward single-phase heat transfer within a compact plate heat exchanger was investigated experimentally. The experimental setup, the data reduction technique and pressure drop results were presented in P ...
Multi-microchannel evaporators used for the cooling of high heat flux electronics have been of interest to both industry and academia for more than a decade. Such interest has sparked a large number of research studies on the flow boiling pressure drop and ...
For several reasons the challenge to keep the loads to the first wall within engineering limits is substantially higher in DEMO compared to ITER. Therefore the pre-conceptual design development for DEMO that is currently ongoing in Europe needs to be based ...
This paper provides detailed analytical modeling and finite elements method (FEM) analysis of the thermal behavior of the medium frequency transformer (MFT). A comprehensive analytical model in form of a thermal network consisting of conduction, convection ...
A fully dynamic model of a microchannel evaporator is presented. The aim of the model is to study the highly dynamic parallel channel instabilities that occur in these evaporators in more detail. The numerical solver for the model is custom-built and the m ...
The thermal bridges constitute critical regions in building envelopes and they are created due to the interruption of the insulation layer. One of the many structural thermal bridges in building envelopes is created in balcony junctions because of the requ ...
Synchronized thermal and visual investigation was carried out on a single-turn channel CLPHP using R245fa as the worldng fluid. The tests were carried out at filling ratios from 10 to 90% and heat inputs from 2 to 60 W for vertical and inclined orientation ...
Lattice vibrations are the microscopic mechanism responsible for a large, if not dominant, contribution to heat transport in crystalline insulators. These vibrations are described in terms of phonons, collective excitations (or quasiparticles) in the form ...