Investigation of perceived air quality, occupants’ behaviour and air pollutant levels in two open-space office buildings in Switzerland

Verena Marie Barthelmes, Maria Viviana Gonzalez Serrano, Caroline Karmann, Dolaana Khovalyg, Dusan Licina
2020
Article de conférence

Résumé

indoor air quality, perceived air quality, occupant behavior, office environment

Official source

https://infoscience.epfl.ch/record/283307?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Validation and application of an urban turbulence parameterisation scheme for mesoscale atmospheric models

Yves-Alain F. Roulet

Growing population, extensive use (and abuse) of the natural resources, increasing pollutants emissions in the atmosphere: these are a few obstacles (and not the least) one has to face with nowadays to ensure the sustainability of our planet in general, and of the air quality in particular. In the case of air pollution, the processes that govern the transport and the chemical transformation of pollutants are highly complex and non-linear. The use of numerical models for simulating meteorological fields, which in turn will determine the transport of pollutants in the atmosphere, is thus a very appropriate tool to describe and understand the air pollution problematic. This work focuses on the meteorological simulation, using a mesoscale model. The stress is particularly put on the parameterisation of urban induced effects on the meteorological fields above a city. A detailed urban parameterisation scheme has been implemented in a mesoscale model in a previous work. This new scheme takes into account the presence of a city in a more accurate way as the traditional method usually used in mesoscale models. In the first part of this work, the urban module was validated for a one-dimensional off-line simulation within and above a street canyon in the city of Basel/Switzerland. The simulation results were compared with measurements taken within and above the same street canyon during an intensive observation period in the frame of the BUBBLE project (Basel UrBan Boundary Layer Experiment). The comparison with the measurements and with a simulation using the traditional urban parameterisation showed that the detailed urban scheme improved the quality of the simulation of turbulent fluxes and meteorological parameters (wind, temperature) in the urban canopy. Further on, the mesoscale was applied for a three-dimensional simulation over the city of Basel and its surroundings. The results showed that the model is able to reproduce the wind pattern that prevailed during the simulated episode, and that the accuracy of the temperature simulation in the city is improved with the urban module. In the third part of this work, an air quality study was performed over the Mexico City basin. The mesoscale model simulated the meteorological conditions for the chosen episode (1 and 2 March 1997). The results were then passed to TAPOM, a Eulerian photochemical model that calculates the space and time distribution of air pollutants. The simulated concentrations over the basin showed good agreement with the observed values. The validated model could then be used to test some emissions reduction scenarios for Mexico City. The use of the detailed urban parameterisation scheme for meteorological fields and air pollutants concentration simulation improved the quality of the results in almost all the applied situations. Consequently, the full modelling tool presented and validated in this work can be used for air quality modelling studies over cities and their surroundings.

EPFL2004

Chargement

Improvement of an urban turbulence parametrization for meteorological operational forecast and air quality modeling

Clive Muller

During the last century, urban pollution has increased with the growth of cities. Urban air quality has become a high priority as it is directly linked to concerns such as human exposure and health. The present work is dedicated to urban air quality modeling with focus on urban meteorology. The main goal is to improve meteorological and air quality simulations in urban areas. Based on measurements and numerical air quality simulations, Chapter 3 describes the meteorological situation and tests an emission inventory for an ozone pollution episode in Mexico City (2 March 1997), in order to determine the principal factors to be accounted in an air quality study. The Mexico City case shows the great influence of meteorological conditions and pollutant emissions on air quality. A thorough understanding of the phenomena governing the meteorological conditions, like small scale convergence, and an accurate emission inventory validated by VOC measurements in the city, are sensitive elements in an air quality study. In Chapter 4, the presence of an Urban Heat Island (UHI) is underlined over the city of Basel (Switzerland) with the BUBBLE measurements. Further on, the ability of aLMo (the operational weather prediction model of MeteoSwiss) to reproduce the effect of a city on the boundary layer atmospheric flow fields is investigated. Results show that aLMo is not able to reproduce the UHI and hence that its surface scheme based on the Monin-Obukhov Similarity Theory (MOST) is not adapted for the urban areas. Therefore, the Buildings Effects Parametrization (BEP) which has been developed by Martilli et al.(2002) especially for urban areas, is implemented in aLMo. Results show that alMo is now able to reproduce the main behavior of the urban boundary layer as the UHI and BEP has hence a real enhancement potential for aLMo. Chapter 5 shows the sensitivity of aLMo with respect to its vertical resolution. In order to limit the sensitivity of aLMo to the grid resolution, BEP is modified. The mesoscale model furnishes the upper boundary conditions for the inner calculation of BEP. That is, BEP recalculates independently the vertical profiles of wind, temperature and energy based on the surface fluxes of momentum, heat and turbulent kinetic energy. The results obtained show a decrease in the sensitivity to the resolution and a better agreement with the measurements. Furthermore, the modified version of BEP gives additional meteorological fields (temperature, wind and TKE) in the urban canopy. The computed temperature in the urban canopy shows a good agreement with measurements in a Basel street canyon. This work shows that it is not necessary to have a high resolution for taking into account modification of the atmospheric flow fields induced by a city.

EPFL2007

Chargement

Today, one of the most important environmental problems in urban areas is air pollution. According to the World Health Organization, air pollution represents a serious risk to human health in many cities of the world. Road traffic is one of the main sources of pollution in cities. Besides, vehicular emissions are released in close proximity to population, increasing the adverse health effects. Road traffic emissions are highly uncertain in developing countries. Existing techniques to assess this source of pollution are expensive and not always accurate. It results difficult for a city from the developing world to afford these techniques and thus, adequate abatement strategies can not be adopted. It is essential to develop methodologies to reduce these uncertainties to manage air quality more effectively. This PhD thesis aims to develop and to implement alternative techniques to assess road traffic emissions. This work focuses on the study of Volatile Organic Compounds (VOCs), this family of pollutants have not been sufficiently studied in cities. The developed techniques were tested during an intensive measuring campaign conducted in Ho Chi Minh City (HCMC), Vietnam. The motorcycles are the main mode of transport in HCMC, this means of transport has contributed to the progress of this rapidly developing city. The high levels of air pollution, the elevated number of motorcycles and especially the limited funding available, made HCMC an interesting place to test the developed methodologies. In a first stage the results of the measuring campaign were used to assess the roadside levels of pollution in HCMC. During the HCMC campaign, 19 C2-C6 VOCs were monitored on-line at roadside level together with other important pollutants. Results show that there is a severe air pollution problem in HCMC. The pollutants that are produced by road traffic are identified by means of a Principal Components Analysis (PCA) receptor Model. The PCA shows that all the VOCs monitored (except isoprene) are produced by motorcycles. It is necessary to develop and to encourage the use of alternative modes of transport in HCMC. The use of the on-line roadside pollutants monitoring together with the PCA showed to be a good first approach to assess the road traffic emissions. This is an affordable technique and it is strongly recommended to use it in cities with limited financial means to study the air pollution problem. This work also presents a new method to estimate road traffic emission factors (EFs). This method is based on a long term tracer experiment conducted during the HCMC campaign. The results of the HCMC tracer experiment were used together with traffic counts and pollutant measurements to calculate the dispersion factors and afterwards the EFs. Estimated EFs for HCMC are within the range of EFs estimated in other studies. Additionally, a Computational Fluid Dynamics Model (CFD) is used to critically evaluate the proposed methodology. The evaluations show that it is possible to accurately estimate the EFs from tracer studies. The methodology proposed here results in an interesting and promising alternative to estimate the EFs. All the techniques presented in this work offer several advantages. Data obtained serve for different purposes at the same time and their use can provide valuable information for urban air quality assessment. For example, concentrations of pollutants are determined at roadside level, as well as their evolution in time, this information is useful for exposure studies. Roadside monitoring can be used to identify the pollutants that are directly emitted by road traffic. Results from the tracer study can be used to estimate the EFs under real urban conditions and to validate dispersion models which in turn can be used in the future to evaluate abatement strategies for such streets.

EPFL2009

Chargement

Validation and application of an urban turbulence parameterisation scheme for mesoscale atmospheric models

Yves-Alain F. Roulet

EPFL2004

Improvement of an urban turbulence parametrization for meteorological operational forecast and air quality modeling

Clive Muller

EPFL2007

EPFL2009