Seismic retrofitSeismic retrofitting is the modification of existing structures to make them more resistant to seismic activity, ground motion, or soil failure due to earthquakes. With better understanding of seismic demand on structures and with our recent experiences with large earthquakes near urban centers, the need of seismic retrofitting is well acknowledged. Prior to the introduction of modern seismic codes in the late 1960s for developed countries (US, Japan etc.) and late 1970s for many other parts of the world (Turkey, China etc.
Construction parasismiquethumb| La Tokyo Skytree, la deuxième plus grande tour au monde (derrière le Burj Khalifa) qui, du haut de ses , a parfaitement résisté au séisme de 2011 de magnitude 9, démontrant l'efficacité des constructions parasismiques japonaises. La construction parasismique ou construction antisismique est la réalisation de bâtiments et infrastructures résistant aux séismes. Elle implique l'étude du comportement des bâtiments et structures sujets à un chargement dynamique de type sismique.
Aléa sismiquevignette|Ceinture de feu du Pacifique L'aléa sismique est la probabilité qu'un séisme destructeur de caractéristiques données (exprimées en général par des paramètres tels que l’accélération, la période de récurrence, l’intensité, le spectre de réponse...) se produise dans une région donnée pendant une période donnée. Il ne doit pas être confondu avec le risque sismique qui est la probabilité qu'un séisme engendre des destructions et fasse des victimes. Ce risque est une combinaison de .
Seismic analysisSeismic analysis is a subset of structural analysis and is the calculation of the response of a building (or nonbuilding) structure to earthquakes. It is part of the process of structural design, earthquake engineering or structural assessment and retrofit (see structural engineering) in regions where earthquakes are prevalent. As seen in the figure, a building has the potential to 'wave' back and forth during an earthquake (or even a severe wind storm). This is called the 'fundamental mode', and is the lowest frequency of building response.
Structural loadA structural load or structural action is a force, deformation, or acceleration applied to structural elements. A load causes stress, deformation, and displacement in a structure. Structural analysis, a discipline in engineering, analyzes the effects of loads on structures and structural elements. Excess load may cause structural failure, so this should be considered and controlled during the design of a structure. Particular mechanical structures—such as aircraft, satellites, rockets, space stations, ships, and submarines—are subject to their own particular structural loads and actions.
Seismic intensity scalesSeismic intensity scales categorize the intensity or severity of ground shaking (quaking) at a given location, such as resulting from an earthquake. They are distinguished from seismic magnitude scales, which measure the magnitude or overall strength of an earthquake, which may, or perhaps may not, cause perceptible shaking. Intensity scales are based on the observed effects of the shaking, such as the degree to which people or animals were alarmed, and the extent and severity of damage to different kinds of structures or natural features.
Char d'assautLe char d'assaut (en anglais : tank, en allemand : Panzer) est un système d'arme mobile constitué d'un canon monté sur un véhicule automobile blindé et le plus souvent chenillé (il existe également des chars légers à roues) permettant à la fois d'évoluer sous protection et de tirer. thumb|redresse=2.5|Schéma légendé d'un char.
Seismic loadingSeismic loading is one of the basic concepts of earthquake engineering which means application of an earthquake-generated agitation to a structure. It happens at contact surfaces of a structure either with the ground, or with adjacent structures, or with gravity waves from tsunami. Seismic loading depends, primarily, on: Anticipated earthquake's parameters at the site - known as seismic hazard Geotechnical parameters of the site Structure's parameters Characteristics of the anticipated gravity waves from tsunami (if applicable).
Seismic vibration controlIn earthquake engineering, vibration control is a set of technical means aimed to mitigate seismic impacts in building and non-building structures. All seismic vibration control devices may be classified as passive, active or hybrid where: passive control devices have no feedback capability between them, structural elements and the ground; active control devices incorporate real-time recording instrumentation on the ground integrated with earthquake input processing equipment and actuators within the structure; hybrid control devices have combined features of active and passive control systems.
Moment d'inertieLe moment d'inertie d'un système physique est une grandeur qui caractérise son inertie vis-à-vis des mouvements de rotation, comme sa masse caractérise son inertie vis-à-vis des mouvements de translation. Il dépend de la valeur et de la répartition des masses au sein du système et a pour dimension (produit d'une masse par le carré d'une longueur) ; il s'exprime donc en dans le Système international d'unités.
