Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This study investigated the origin of the enhanced pseudo-elasticity of additively manufactured vanadium carbide-containing Fe-based shape memory alloys. The aged samples with two different starting microstructures, as-built and solution-treated, showed co ...
One-dimensional microrods (4-5 mm) of PbI2 and CH3NH3PbI3 (MAPbI(3)) with unique structural and morphological properties have been grown at room temperature. X-ray diffraction (XRD) patterns of both types of micro-rods exhibit a hexagonal system (P3m1(164) ...
The deformation-induced martensitic transformation observed in specific materials can enhance their mechanical properties or result in functional properties. For example, the transformation induced plasticity (TRIP) effect results in a good combination of ...
Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...
The martensitic phase transformation in steel is one of the most famous solid state transformation because of its contribution in the development of the modern industry. This transformation from a face-centered cubic (FCC) high temperature phase, called th ...
The search for new high-temperature alloys that can enable higher-efficiency/lower-emissions power generation has accelerated with the discovery of body-centered cubic (bcc) refractory High Entropy Alloys (HEAs). These many-component, non-dilute alloys in ...
The influence of post-heat treatment on the microstructure and properties of 4D printed Fe-17Mn-5Si-10Cr-4Ni (wt. %) shape memory alloy (SMA) produced via a laser powder bed fusion process is investigated in this study. It is shown that heat-treatment temp ...
The complex and intricate microstructure of B19′ martensite in shape memory nickel titanium alloys is generally explained with the Phenomenological Theory of Martensitic Crystallography (PTMC). Over the last decade, we have developed an alternative approac ...
The microstructural evolution of the two austenitic alloys Fe-20Mn-3Al-0.7C wt pct and Fe-20Mn-6Al-0.7C wt pct when different thermal and thermomechanical treatments are performed has been studied. To this end, a generic industrial die of 100 ton capacity ...
The high-pressure, high-temperature behavior of iron was investigated to 140 GPa and 3500 K with in situ synchrotron X-ray diffraction. Iron samples were compressed in diamond-anvil cells and heated up with the double-sided laser-heating system installed a ...
